The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning
Authors:
- 5 November 2020
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 55 (11) , 1459-1472
Abstract
As a promising technology to revolutionize traditional manufacturing processes, additive manufacturing has received great attention by virtue of its cost savings, minimum material waste, and tool-less production of complex geometries. The development of fiber-reinforced composites via this technique that exhibits superior strength is thus becoming a hot spot in recent years. This paper focused on the 3 D printing of polylactic acid (PLA) composites with the incorporation of chopped long carbon fiber (CF) with an average length of 4.6 mm via FDM fabrication. By varying its loading quantity, the effect of CF contents on the mechanical, thermal, and morphological properties of these 3 D printed composites was thoroughly investigated. The results showed that with the increase of CF contents, all assessed properties of CF/PLA composites including tensile properties, flexural properties, hardness, and thermal conductivity were effectively improved compared to the neat PLA. Their performance exhibited the same upward-downward-upward trend with the addition of CF. It can be attributed to the mutual influence generated from inter-/intra filament porosities and the high stiffness of CF. Meanwhile, a machine learning technique, Gaussian Process modeling was also introduced in this study for the property prediction of the composites. In comparison with the experimental analysis, the optimal CF content of 6.7 wt% with the best overall performance was predicted using this model, which was very close to the best experimental results at 5 wt% CF.Keywords
Funding Information
- Australian Research Council (DP160102491)
This publication has 40 references indexed in Scilit:
- Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer compositesComposites Part B: Engineering, 2015
- Highly oriented carbon fiber–polymer composites via additive manufacturingComposites Science and Technology, 2014
- The importance of carbon fiber to polymer additive manufacturingJournal of Materials Research, 2014
- Mechanical properties of injection-molded carbon fiber/polypropylene composites hybridized with nanofillersComposites Part A: Applied Science and Manufacturing, 2013
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic SensorsPLOS ONE, 2012
- A Review of Additive ManufacturingISRN Mechanical Engineering, 2012
- Extrusion Printing of Flexible Electrically Conducting Carbon Nanotube NetworksAdvanced Functional Materials, 2012
- Hard and tough carbon nanotube-reinforced zirconia-toughened alumina composites prepared by spark plasma sinteringCarbon, 2012
- Design for Additive Manufacturing of Cellular StructuresComputer-Aided Design and Applications, 2008
- Micromechanics analysis of Kevlar-29 aramid fiber and epoxy resin microdroplet composite by Micro-Raman spectroscopyComposite Structures, 2006