Combustion Control and Operating Range Expansion With Direct Injection of Reaction Suppressors in a Premixed DME HCCI Engine
Authors:
- 3 March 2003
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Direct injection of various ignition suppressors, including water, methanol, ethanol, 1-propanol, hydrogen, and methane, was implemented to control ignition timing and expand the operating range in an HCCI engine with induced DME as the main fuel. Ultra-low NOx and smoke-less combustion was realized over a wide operating range. The reaction suppressors reduced the rate of low-temperature oxidation and consequently delayed the onset of high-temperature oxidation. Analysis of the chemical kinetics showed a reduction of OH radical in the premixed charge with the suppressors. Among the ignition suppressors, alcohols had a greater impact on OH radical reduction resulting in stronger ignition suppression. Although water injection caused a greater lowering of the temperature, which also suppressed ignition, the strong chemical effect of radical reduction with methanol injection resulted in the larger impact on suppression of oxidation reaction rates.Keywords
This publication has 16 references indexed in Scilit:
- Expansion of the Operating Range with In-Cylinder Water Injection in a Premixed Charge Compression Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2002
- Auto-Ignition and Combustion of n-Butane and DME/Air Mixtures in a Homogeneous Charge Compression Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2000
- Homogeneous Charge Compression Ignition with Water InjectionSAE International Journal of Advances and Current Practices in Mobility, 1999
- A detailed chemical kinetic model for high temperature ethanol oxidationInternational Journal of Chemical Kinetics, 1999
- A wide range modeling study of dimethyl ether oxidationInternational Journal of Chemical Kinetics, 1998
- Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel InjectionSAE International Journal of Advances and Current Practices in Mobility, 1996
- A Study of a Compression Ignition Methanol Engine with Converted Dimethyl Ether as an Ignition ImproverSAE International Journal of Advances and Current Practices in Mobility, 1992
- On Board Dimethyl Ether Generation to Assist Methanol Engine Cold StartingSAE International Journal of Advances and Current Practices in Mobility, 1988
- Prediction of laminar flame properties of methanol-air mixturesCombustion and Flame, 1980
- Comprehensive Mechanism for Methanol OxidationCombustion Science and Technology, 1979