The Effect of Surface Roughness on Sursulf, Gas and Plasma Nitride Coatings on Austenitic Stainless Steel Type AISI 316LN
Authors:
- 24 October 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 110-116, 758-763
Abstract
Austenitic stainless steel type AISI 316LN (316LN SS) material has been nitrided by three different nitride techniques such as Sursulf, Gas and Plasma nitriding. The 316LN SS samples have been prepared with two different surface roughnesses. The effects of surface roughness on nitriding with respect to formation of coating, case depth, increase in surface hardness and coating adhesion strength have been evaluated. The coating thickness was high for mirror polished samples than ground samples for all nitriding techniques. The coating thickness was very high (76.5µm) for plasma nitrided (PN) mirror polished sample and thin (22.5µm) & uneven for Sursulf Nitrided (SSN) ground sample. However, the SSN sample produces high surface hardness and good adhesion strength than PN. The Gas nitided (GN) sample produces the moderate result between SSN and PN.Keywords
This publication has 6 references indexed in Scilit:
- Development of nitride-layer of AISI 304 austenitic stainless steel during high-temperature ammonia gas-nitridingApplied Surface Science, 2010
- Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steelWear, 2004
- Wear resistance of pulse plasma nitrided AISI 4140 and A355 steelsMaterials Science and Engineering: A, 2001
- The effects of plasma nitriding process parameters on the wear characteristics of AISI M2 tool steelTribology Letters, 2000
- Observation of a compound layer with very low friction coefficient in ion-nitrided martensitic 410 stainless steelSurface and Coatings Technology, 1998
- Performance studies on salt bath treated low-carbon steel gearsTribology International, 1983