Determining relationship between bone screw insertion torque and insertion speed
Authors:
- 1 November 2022
- journal article
- research article
- Published by Walter de Gruyter GmbH in at - Automatisierungstechnik
- Vol. 70 (11) , 976-991
Abstract
Bone screws are used in many orthopaedic procedures. For low-density cancellous and osteoporotic bone, the torque margin for bone screw insertion can be low; over-tightening will strip the threads, while under-tightening may allow screw loosening over time. A model-based system of automatic individualised torque regulation has been proposed, however current efforts assume speed-independence. This publication addresses the lack of knowledge on the speed dependance of insertion torque. Therefore, a bone screw was inserted at various speeds between 2.5 and 25 rpm into 4 different densities of polyurethane foam synthetic bone. A statistically significant upwards trend was found for all materials (p < 0.05). These findings can be used to correct identified bone strength values from previous models, although investigating the physical cause may improve correction schemes.Keywords
This publication has 33 references indexed in Scilit:
- Inadvertent Screw Stripping During Ankle Fracture Fixation in Elderly BoneGeriatric Orthopaedic Surgery & Rehabilitation, 2011
- Factors affecting the clinical success of screw implants used as orthodontic anchorageAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2006
- Multimodel InferenceSociological Methods & Research, 2004
- Composition and Mechanical Properties of Cancellous Bone from the Femoral Head of Patients with Osteoporosis or OsteoarthritisJournal of Bone and Mineral Research, 1997
- Cancellous Bone Screw Thread Design and Holding PowerJournal of Orthopaedic Trauma, 1996
- Comparison of mechanical properties of human, bovine bone and a new processed bone xenograftBiomaterials, 1993
- Comparison of bone screw holding strength in healthy bovine and osteoporotic human cancellous boneClinical Materials, 1992
- Mechanical properties of trabecular bone. Dependency on strain rateJournal of Biomechanics, 1991
- Design and testing of external fixator bone screwsJournal of Biomedical Engineering, 1990
- Holding Power of Orthopedic Screws Comparison of Self-tapped and Pre-tapped Screws in Foal BoneVeterinary Surgery, 1986