Evaluation of polypropylene prostheses designed by the International Committee of the Red Cross for trans tibial amputees
Authors:
- S. HeimSHS. Heim
- 1 April 2000
- journal article
- Published by Wolters Kluwer Health in Prosthetics and Orthotics International
- Vol. 24 (1) , 47-54
Abstract
Vely for 10 and 19 months. All but one patient had at least one other type of prosthesis to compare with. Twenty eight (28) patients were satisfied with the PP prosthesis. Among these 23 found the PP prosthesis the preferred artificial limb, and one patient found the PP limb equal to the aluminium prosthesis previously in use. In 6/28 patients having an aluminium (ALU) prostheses this was found the best, and the 1 already mentioned found it equivalent to the new technology. In only 1/20 cases having an Automated Fabrication of Mobility Aids (AFMA) prosthesis available this was found the best. One (1) double amputee found all three designs equal. Minor failures of the PP prostheses were encountered; in 4 cases small cracks in the hard socket; in 3 cases cracks of the cosmetic socket seam. From an overall prospect the PP technology can be recommended for trans tibial prostheses....Keywords
This publication has 8 references indexed in Scilit:
- Preliminary experiences with modiñed SACK feet manufactured and used in a tropical developing world settingProsthetics and Orthotics International, 1999
- Evaluation of use and durability of polypropylene trans-tibial prosthesesProsthetics and Orthotics International, 1999
- A closer look at amputees in VietnamProsthetics and Orthotics International, 1999
- An audit of the quality of the stump and its relation to rehabilitation in lower limb amputeesProsthetics and Orthotics International, 1998
- A review of the consensus conference on appropriate prosthetic technology in developing countriesProsthetics and Orthotics International, 1996
- Different approaches and cultural considerations in third world prostheticsProsthetics and Orthotics International, 1995
- Cost-benefits in orthopaedic technology by using thermoplastics in developing countriesProsthetics and Orthotics International, 1991
- Simplified, low cost below-knee prosthesisProsthetics and Orthotics International, 1986