Degradation of active region in InGaAsP/InP buried heterostructure lasers
Authors:
- 15 October 1985
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 58 (8) , 2932-2936
Abstract
In InGaAsP/InP buried heterostructure lasers, a failure mode connected to the active region, not to the burying region, is observed. The degradation is related to a decrease in the carrier lifetime or a decrease in nonradiative lifetime due to degradations at the edges of the active region. Practically, the bad devices may be screened out by the hard screening method, however, the failure mode could determine the reliability of the devices under high-temperature or high-power operation, so care should be taken during forming the mesa and a regrowth of the burying layer.Keywords
This publication has 9 references indexed in Scilit:
- Effect of active layer placement on the threshold current of 1.3-μm InGaAsP etched mesa buried heterostructure lasersApplied Physics Letters, 1984
- Liquid phase epitaxial growth on {111}In planes of InPJournal of Applied Physics, 1983
- Reliability in InGaAsP/InP buried heterostructure 1.3 µm lasersIEEE Journal of Quantum Electronics, 1983
- Position of the degradation and the improved structure for the buried crescent InGaAsP/InP (1.3 μm) lasersApplied Physics Letters, 1983
- Stress tests on 1.3 μm buried-heterostructure laser diodeElectronics Letters, 1983
- Nature of dark defects revealed in InGaAsP/InP double heterostructure light emitting diodes aged at room temperatureJournal of Applied Physics, 1982
- Deep Impurity Levels in InP LEC CrystalsJapanese Journal of Applied Physics, 1981
- Pressure Dependence of Thermal Conductivity of Liquid 3He at Very Low TemperaturesJournal of the Physical Society of Japan, 1980
- Carrier lifetime measurement of a junction laser using direct modulationIEEE Journal of Quantum Electronics, 1968