Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications
Authors:
- 14 April 2023
- journal article
- research article
- Published by Emerald Publishing in World Journal of Engineering
- Vol. 21 (3) , 588-603
Abstract
Purpose: This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S11/S22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S12/S21: 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach: Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings: Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications: The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value: The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.Keywords
This publication has 38 references indexed in Scilit:
- Bandwidth enhancement of microstripline-to-waveguide transitions for broadband E-band module applicationsMicrowave and Optical Technology Letters, 2016
- A New Broadband Microstrip-to-SIW Transition Using Parallel HMSIWJournal of Electromagnetic Engineering and Science, 2012
- NOVEL LOW-COST END-WALL MICROSTRIP-TO-WAVEGUIDE SPLITTER TRANSITIONProgress In Electromagnetics Research, 2010
- W-BAND MICROSTRIP-TO-WAVEGUIDE TRANSITION USING VIA FENCESProgress In Electromagnetics Research Letters, 2010
- Design of microstrip to waveguide transition in the W band suitable antenna or integrated circuits connectionsMicrowave and Optical Technology Letters, 2005
- Investigations on the propagation characteristics of the substrate integrated waveguide based on the method of linesIEE Proceedings - Microwaves, Antennas and Propagation, 2005
- Finite-difference frequency-domain algorithm for modeling guided-wave properties of substrate integrated waveguideIEEE Transactions on Microwave Theory and Techniques, 2003
- A broad-band microstrip-to-waveguide transition using quasi-Yagi antennaIEEE Transactions on Microwave Theory and Techniques, 1999
- A novel waveguide-to-microstrip transition for millimeter-wave module applicationsIEEE Transactions on Microwave Theory and Techniques, 1999
- Microstrip to waveguide transition compatible with MM-wave integrated circuitsIEEE Transactions on Microwave Theory and Techniques, 1994