Enhancement of Corrosion and Wear Resistance of Ni–P Coatings Stems from the Synergistic Effects of Cr3C2 and Heat Treatment
- 25 July 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (31) , 16400-16418
Abstract
This study describes the preparation of Ni-P-Cr3C2 composite coatings using pulsed electrodeposition, with varying Cr3C2 concentrations (0, 1, 2, 3, 4, and 5 g/L). Subsequently, the Ni-P-Cr3C2 composite coatings are heat-treated at different temperatures (200, 400, and 600 °C) using the characteristic of Cr3C2 oxidizing to Cr2O3 at high temperatures. The Ni-P coatings, Ni-P-Cr3C2 composite coatings, and heat-treated-state Ni-P-Cr3C2 composite coatings are compared and discussed. The results show that the hardness, wear resistance, and corrosion resistance of the composite coatings are optimized when the Cr3C2 content is 3 g/L and the heat-treatment temperature is 400 °C. This is due to the presence of oxides such as Cr2O3 on the surface of the composite coatings after heat treatment at 400 °C. By efficiently enhancing the coating's densification to the substrate, these oxides raise the composite coating's resistance to corrosion and wear. The Ni-P-Cr3C2 composite coating in its heat-treated makeup at 400 °C is found to have long-term corrosion resistance in the 3.5 wt % NaCl solution immersion test. This study provides a new idea in the field of corrosion.Keywords
Funding Information
- National Natural Science Foundation of China (51774245)
This publication has 70 references indexed in Scilit:
- Corrosion resistance of Cr 2 O 3 coating formed by in‐situ oxidation on 2205 duplex stainless steel in different pH solutionsRare Metals, 2023
- Performance of pre-cracked beams exposed to corrosion environment cast with ultra-high performance concreteAin Shams Engineering Journal, 2023
- Mechanical and wear properties of TiN films on differently pretreated TiCN-based cermetsApplied Surface Science, 2021
- In situ assemble Ti3C2Tx MXene@MgAl-LDH heterostructure towards anticorrosion and antiwear applicationChemical Engineering Journal, 2021
- Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrateCeramics International, 2020
- Influence of post−deposition heat treatment on the properties of electrodeposited Ni−Mo alloy coatingsApplied Surface Science, 2018
- The influence of the phosphorous content and heat treatment on the nano-micro-structure, thickness and micro-hardness of electroless Ni-P coatings on steelApplied Surface Science, 2017
- Synthesis of hexagonal boron nitride fibers within two hour annealing at 500 °C and two hour growth duration at 1000 °CCeramics International, 2016
- Electrochemical and structural properties of electroless Ni-P-SiC nanocomposite coatingsApplied Surface Science, 2013
- XPS analysis of thin chromium filmsSurface and Interface Analysis, 1992