Finite Element Analysis and Calculation Method of Residual Flexural Capacity of Post-fire RC Beams
Authors:
Open Access
- 30 September 2020
- journal article
- research article
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 14 (1) , 1-17
Abstract
Fire tests and subsequent bending tests of four reinforced concrete (RC) beams were performed. Based on these tests, the post-fire performance of RC beams was further studied using finite-element simulation through reasonable selection of suitable thermal and thermodynamic parameters of steel and concrete materials. A thermodynamic model of RC beams with three sides under fire was built using finite-element analysis (FEA) software ABAQUS. The FEA model was validated with the results of fire tests. Different factors were taken into account for further parametric studies in fire using the propsed FE model. The results show that the main factors affecting the fire resistance of the beams are the thickness of the concrete cover, reinforcement ratio of longitudinal steel, the fire exposure time and the fire exposure sides. Based on the strength reduction formula at high temperature of steel and concrete and four test results, an improved section method was proposed to develop a calculation formula to calculate the flexural capacity of RC beams after fire. The theoretical calculation method proposed in this paper shows good agreement with FEA results, which can be used to calculate the flexural capacity of RC beams after fire.Keywords
Funding Information
- Foundation of China Scholarship Council (201805975002)
This publication has 15 references indexed in Scilit:
- Fire induced progressive collapse potential assessment of steel framed buildings using machine learningJournal of Constructional Steel Research, 2020
- 3D finite element analysis of the whole-building behavior of tall building in fireAdvances in Computational Design, 2016
- Structural Analysis and Design to Prevent Disproportionate Collapse2016
- Reliability analysis of reinforced concrete columns exposed to fireFire Safety Journal, 2013
- Response of a multi-storey steel composite building with concentric bracing under consecutive column removal scenariosJournal of Constructional Steel Research, 2012
- Experimental research on post-fire behaviour of reinforced concrete columnsFire Safety Journal, 2009
- Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment regionJournal of Constructional Steel Research, 2008
- Nonlinear analysis of reinforced concrete cross-sections exposed to fireFire Safety Journal, 2007
- Non-linear fire-resistance analysis of reinforced concrete beamsSTRUCTURAL ENGINEERING AND MECHANICS, 2003
- Effect of fire on shear behaviour of R.C. beamsComputers & Structures, 1997