The Impact of Lubricant Film Thickness and Ball Bearings Failures
Open Access
- 2 June 2019
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 7 (6) , 48
Abstract
An effort was made to find a relationship between the lubricant thickness at the point of contact of rolling element ball bearings, and empirical equations to predict the life for bearings under constant motion. Two independent failure mechanisms were considered, fatigue failure and lubricant failure resulting in seizing of the roller bearing. A theoretical formula for both methods was established for the combined probability of failure using both failure mechanisms. Fatigue failure was modeled with the empirical equations of Lundberg and Palmgren and standardized in DIN/ISO281. The seizure failure, which this effort sought to investigate, was predicted using Greenwood and Williamson’s theories on surface roughness and asperities during lubricated contact. These two mechanisms were combined, and compared to predicted cycle lives of commercial roller bearing, and a clear correlation was demonstrated. This effort demonstrated that the Greenwood–Williams theories on the relative height of asperities versus lubricant film thickness can be used to predict the probability of a lubricant failure resulting in a roller bearing seizing during use.Keywords
All Related Versions
This publication has 42 references indexed in Scilit:
- Compression Heating and Cooling in Elastohydrodynamic ContactsTribology Letters, 2009
- Interferometry Measurement of Spin Effect on Sliding EHLTribology Letters, 2008
- Increase of Traction Coefficient due to Surface MicrotextureTribology Letters, 2007
- On the nature of running-inTribology International, 2005
- In-Contact IR Spectroscopy of Hydrocarbon LubricantsTribology Letters, 2005
- Effect of geometry change of rough point contact due to lubricated sliding wear on lubricationTribology Letters, 1998
- A Dynamic System Model for Lubricated Sliding Wear and Running-InJournal of Tribology, 1991
- The Wear Process During the “Running-In” of Steel in Lubricated SlidingJournal of Tribology, 1987
- The solution of the point contact elasto-hydrodynamic problemProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1975
- Observations of steel surfaces under lubricated wearWear, 1973