Robust Optimization of Variable-Camber Continuous Trailing-Edge Flap Static Aeroelastic Action
Authors:
- 1 March 2017
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 55 (3) , 1031-1043
Abstract
A robust optimization method is described in this paper, focusing on the optimization of a variable-camber continuous trailing-edge flap system for drag reduction in transonic cruise. The variable-camber continuous trailing-edge flap, through the rich combination of shapes it can attain, has the potential to provide greater design and operation freedom than conventional flap systems as well as greater efficiency in drag reduction and performance improvement. The deformation shape optimization of such a system, however, when based on rigorous computational fluid dynamics simulations, presents a significant computational challenge because of the high cost of repetitive analyses required. The construction of surrogate models and their use in the optimization process is one common way to tackle this challenge. Here, stochastic kriging is used, extending the commonly used deterministic kriging. Accounting for the intrinsic uncertainty of data, stochastic kriging and the optimization based on it are well suited for addressing uncertain flight conditions as well as math modeling limitations. An optimization process for the variable-camber continuous trailing-edge flap system that couples shape synthesis with high-fidelity aerodynamic simulations, accounting for static aeroelastic interactions and load distribution constraints, is presented. A potential for robust optimal drag subject to flight Mach number uncertainties is shown.Keywords
This publication has 28 references indexed in Scilit:
- Drag Optimization Study of Variable Camber Continuous Trailing Edge Flap (VCCTEF) Using OVERFLOW2014
- Aeroelastic Modeling and Drag Optimization of Flexible Wing Aircraft with Variable Camber Continuous Trailing Edge Flap2014
- Initial Assessment of a Variable-Camber Continuous Trailing-Edge Flap System for Drag-Reduction of Non-Flexible Aircraft in Steady-State Cruise Condition2013
- A Mission Adaptive Variable Camber Flap Control System to Optimize High Lift and Cruise Lift to Drag Ratios of Future N+3 Transport Aircraft2013
- Aeroelastic Modeling of Elastically Shaped Aircraft Concept via Wing Shaping Control for Drag Reduction2012
- A review of practices for robust design methodologyJournal of Engineering Design, 2008
- A Monte Carlo Method for Reliability-Based Design Opitmization2006
- Safety Envelope for Load Tolerance and Its Application to Fatigue Reliability Design2006
- A review of simulation optimization techniques2002
- Robust design optimization of structures through consideration of variationComputers & Structures, 2002