Development of a Novel Approach for Controlling and Predicting Residual Sugars in Wines
Preprint
- 22 February 2024
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Residual sugars (RS) in wine are the sugars that remain in a wine after fermentation is complete. In some wine styles, such as semi-dry wines, the accurate measurement of the RS concentration is critical for both qualitative and legislative reasons. Brix, measured by a simple refractometer, can give a good estimation of the RS concentration in the must, but during fermentation, the presence of alcohol leads to inaccurate sugar measurements. In order to measure the RS accurately, other more precise techniques are used, most of which are expensive or require professional skills. Therefore, novel approaches for rapid, easy, and practical measurements for estimating the sugar content were suggested over the years. However, most of these methods do not supply an actual measurement of RS but rather give brix values, and those that measure RS involve special equipment, which is less relevant for small wineries. This study suggests a novel model for predicting and controlling the wine's residual sugar. The data the model uses is the initial brix of the must before fermentation and its density during fermentation. The model was created by measuring actual residual sugars during the fermentation of natural and synthetic musts, with various degrees of initial brix levels, while simultaneously measuring their densities and correlating the two measurements. Linear regression between the residual sugar of the wine and its density was obtained for all treatments and repetitions (i.e., different values of must initial brix) with R2 values above 0.97. Using the model, one can calculate (before commencing the fermentation) the density values at which the fermentation will reach a particular desired residual sugar value for a specific initial brix level; the model is applicable for the fermentation conditions used in this work, i.e., brix levels of 18-27˚Bx, Saccharomyces cerevisiae strains (fx-33 and fx-10) in common conditions of fermentation regarding temperature and aeration.Keywords
All Related Versions
This publication has 30 references indexed in Scilit:
- Novel approaches for a brix prediction model in Rondo wine grapes using a hyperspectral Camera: Comparison between destructive and Non-destructive sensing methodsComputers and Electronics in Agriculture, 2023
- Exploring the suitability of Saccharomyces cerevisiae strains for winemaking under aerobic conditionsFood Microbiology, 2022
- Comparison of ultraviolet and refractive index detections in the HPLC analysis of sugarsFood Chemistry, 2021
- A novel digital image method for determination of reducing sugars in aged and non-aged cachaças employing a smartphoneFood Chemistry, 2021
- Combination of Refractometry and Densimetry – A Promising Option for Fast Raw Methanol AnalysisChemie Ingenieur Technik, 2020
- Factors affecting yeast ethanol tolerance and fermentation efficiencyWorld Journal of Microbiology and Biotechnology, 2020
- Prediction of quality parameters in straw wine by means of FT-IR spectroscopy combined with multivariate data processingFood Chemistry, 2020
- Validation of a rapid and sensitive HPLC/MS method for measuring sucrose, fructose and glucose in plant tissuesFood Chemistry, 2018
- Near infrared reflectance spectroscopy and multivariate analysis in enologyAnalytica Chimica Acta, 2004
- Discrepancy in glucose and fructose utilisation during fermentation by wine yeast strainsFEMS Yeast Research, 2004