A 120-GHz wideband FMCW radar demonstrator based on a fully-integrated SiGe transceiver with antenna-in-package
Authors:
- 1 May 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This paper presents a fully-integrated D-Band bistatic frequency-modulated continuous-wave radar (FMCW) radar sensor based on a 130nm SiGe BiCMOS technology for short-range applications. The radar sensor includes transmit and receive antennas integrated in an embedded-wafer-level-ball-grid-array (eWLB) package. The transceiver chip is based on ×30 frequency multiplication, which enables the use of off-the-shelf 4GHz phase-locked-loops. A fully-differential IQ receiver is implemented by means of a differential 3-dB branch line coupler. On-wafer measurements show a maximum output power of 0 dBm. The radar sensor is mounted on a low cost PCB and is used in conjunction with an FPGA based baseband board for analog-to-digital conversion, processing and evaluation of the IF signals. In order to verify the operation, FMCW measurements of static targets are performed with a sweep bandwidth of up to 10 GHz, which corresponds to a minimum range-resolution of 3 cm. The radar chip consumes around 560mW from a 3.3V power supply and the package size is 12mm × 6 mm.Keywords
This publication has 1 reference indexed in Scilit: