Hydrogen production by the catalytic steam reforming of methanol part 1: The thermodynamics
Authors:
- 1 December 1981
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 59 (6) , 720-727
Abstract
The thermodynamic equilibria involved in the catalytic steam reformation of methanol to produce hydrogen have been examined over the ranges of pressure 101–3040 kPa, temperature 400–700K and water to methanol feed ratio 1.5–0.67. Four models have been considered based upon possible reaction products and the equilibrium composition of each model calculated.The presence of methane and carbon reduce the quantity and quality of hydrogen produced. The best condition for hydrogen production occurs at 500K in the model in which carbon (soot) and methane gas are excluded and where pressures are low, and water is in excess in the feed. To achieve these conditions in practice the reactions for methane formation, which is thermodynamically favoured, and the appearance of carbon (soot) must be inhibited.Keywords
This publication has 5 references indexed in Scilit:
- THE CATALYTIC ACTIVITIES OF METHANOL REFORMING CATALYSTS AND THEIR PREPARATIONSChemistry Letters, 1979
- Iron-chromium catalysts in the conversion of methanol with water vaporReaction Kinetics, Mechanisms and Catalysis, 1978
- Kinetics of catalyzed reaction of methanol with water vapourCollection of Czechoslovak Chemical Communications, 1975
- Hydrogen-Generating Plant Based on Methanol Decomposition1969
- Hydrogen from Natural Gas for Fuel Cells1969