Comparison of methods to measure yield stress of soft solids
Authors:
- 1 January 2010
- journal article
- Published by Society of Rheology in Journal of Rheology
- Vol. 54 (1) , 81-94
Abstract
Many interesting industrial materials are highly viscous or paste-like, i.e., soft solids. Their complexity, proceeding from heterogeneous structures, often reveals interesting rheological properties. Their processing requires the determination of rheological parameters such as viscosity, modulus, and yield stress value. We compare three methods to measure the yield stress of one particular soft solid system, i.e., concentrated surfactant systems, models for bar soap. One method is based on orifice die extrusion and uses the Benbow–Bridgwater equation. Two methods used a rotational rheometer: in one, dynamic (small strain sinusoidal oscillation) experiments were performed as a function of increasing strain amplitude with serrated parallel plate geometry. The maximum in the elastic stress curve was used to estimate the yield stress. The other method using the rotational rheometer, which we call strand shearing, involves the use of a new fixture designed to grip these samples that were too stiff for serrated plates but too soft for traditional solids fixtures. In this method, the maximum of a plot of stress versus time at a constant shear rate is taken as the yield stress. The advantages and limitations of these techniques are discussed and applied to our particular soap model system.Keywords
This publication has 17 references indexed in Scilit:
- Flexible chocolateSoft Matter, 2006
- On the interpretation of orifice extrusion data for viscoplastic materialsChemical Engineering Science, 2005
- Product and process design for structured productsAIChE Journal, 2004
- On the Origins of Paste FractureIndustrial & Engineering Chemistry Research, 2004
- An investigation of fracture criteria for predicting surface fracture in paste extrusionInternational Journal of Mechanical Sciences, 2002
- Improving polymer blend dispersion in mini‐mixersPolymer Engineering & Science, 2001
- Elastic and Yield Behavior of Strongly Flocculated ColloidsJournal of the American Ceramic Society, 1999
- Flow Mechanics on Extrusion through a Square‐Entry DieJournal of the American Ceramic Society, 1992
- Measuring the Flow Properties of Yield Stress FluidsAnnual Review of Fluid Mechanics, 1992
- Some Rheological Measurements on Magnetic Iron Oxide Suspensions in Silicone OilJournal of Rheology, 1986