Fatigue Failure Criterion of Adhesively-Bonded Joints Under Combined Stress Conditions
Authors:
- 1 August 1996
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 59 (1-4) , 111-126
Abstract
A study was conducted to investigate fatigue failure criteria for adhesively-bonded joints under combined stress conditions. Two types of adhesively-bonded joint specimens were used: the scarf joint and the butterfly-type butt joint. Both types of joints have considerably uniform combined stress distributions in the adhesive layer. Furthermore, the stress distributions of these joints were analyzed by a finite element method. The results showed that the maximum principal, the von Mises equivalent and the maximum shear stresses in the uniform stress region of the adhesive layer at the endurance limit are correlated with the principal stress ratio.Keywords
This publication has 8 references indexed in Scilit:
- J II fracture testing of a plastically deforming materialInternational Journal of Fracture, 1991
- On the Uniformity of Stresses in Some Adhesive Deformation SpecimensThe Journal of Adhesion, 1989
- Strength evaluation of scarf joint bonded with adhesive resin. (1st report Adherends of the same metals)TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1987
- Adhesive tensile strengths of scarf and butt joints of steel plates. (Relation between adhesive layer thicknesses and adhesive strengths of joints)JSME International Journal, 1987
- End effects in scarf jointsComposites Science and Technology, 1985
- Adhesive Tensile Strengths of Scarf and Butt Joints of Steel Plates : 2nd Report, Relation between Mechanical Properties of Adhesive and Fracture Criteria of JointsBulletin of JSME, 1985
- On the Most Suitable Specimen Shape for Testing Shear Strength of Plastics1959
- A Theory of Adhesive Scarf JointsJournal of Applied Mechanics, 1957