Multipollutant Control (MPC) of Flue Gas from Stationary Sources Using SCR Technology: A Critical Review
Top Cited Papers
- 11 February 2021
- journal article
- review article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (5) , 2743-2766
Abstract
The emission of gaseous pollutants from the combustion of fossil fuels is believed to be one of the most serious environmental challenges in the 21st century. Given the increasing demands of multipollutant control (MPC) via adsorption or catalysis technologies, such as NOx, volatile organic compounds (VOCs), heavy metals (Hg etc.), and ammonia, and considering investment costs and site space, the use of existing equipment, especially the selective catalytic reduction (SCR) system to convert pollutants into harmless or readily adsorbed substances, is one of the most practical approaches. Consequently, many efforts have been directed at achieving the simultaneous elimination of multipollutants in a SCR convertor, and this method has been widely used to mitigate the stationary emission of NOx. However, the development of active, selective, stable, and multifunctional catalysts/adsorbents suitable for large-scale commercialization remains challenging. Herein, we summarize recent works on the applications of SCR in MPC, describing the approaches of (i) SCR + VOCs oxidation, (ii) SCR + heavy metal control, and (iii) SCR + NH3 reduction to reveal that the efficiency of simultaneous elimination depends on catalyst composition and flue gas parameters. Furthermore, the synergistic promotional/inhibitory effects between SCR and VOCs/ammonia/heavy metal oxidations are shown to be the key to the feasibility of the reactions.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2017YFC0210200, 2017YFC0212800)
- National Natural Science Foundation of China (21906090, 22022605)
This publication has 180 references indexed in Scilit:
- Selective catalytic oxidation of ammonia to nitrogen over CuO-CeO2 mixed oxides prepared by surfactant-templated methodApplied Catalysis B: Environment and Energy, 2013
- Oxidation Catalysts for Elemental Mercury in Flue Gases—A ReviewCatalysts, 2012
- Selective catalytic oxidation of ammonia to nitrogen over ceria–zirconia mixed oxidesApplied Catalysis A: General, 2012
- Selective Catalytic Oxidation (SCO) of Ammonia to Nitrogen over Hydrotalcite Originated Mg–Cu–Fe Mixed Metal OxidesCatalysis Letters, 2011
- Experimental Study of Gaseous Elemental Mercury Removal with CeO2/γ-Al2O3Energy & Fuels, 2011
- Broadband UV spectroscopy system used for monitoring of SO2 and NO emissions from thermal power plantsAtmospheric Environment, 2010
- The performance of iodine on the removal of elemental mercury from the simulated coal-fired flue gasJournal of Hazardous Materials, 2009
- Assessment of environmental impact on air quality by cement industry and mitigating measures: a case studyEnvironmental Monitoring and Assessment, 2008
- Removal of NOx with radical injection caused by corona dischargeFuel, 2004
- Retention of trace elements using fly ash in a coal gasification flue gasJournal of Chemical Technology & Biotechnology, 2002