Effects of SEBS-g-MA on Rheology, Morphology and Mechanical Properties of PET/HDPE Blends
Authors:
- 2 March 2015
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 30 (1) , 91-99
Abstract
The effects of additive styrene/ethylene-butylene/styrene copolymer grafted with maleic anhydride (SEBS-g-MA) were investigated on the rheology, morphology and mechanical properties of a polyethylene terephthalate (PET)/high density polyethylene (HDPE) blend. The ratio of the two components was changed in small increments to track phase inversion. The rheology measurements show that SEBS-g-MA acts differently on HDPE and PET, as different morphologies are formed due to viscosity ratio change. With the help of electron microscopy various phases after extrusion and after injection molding were revealed and identified. Because of the high viscosity of HDPE the co-continuous morphology was immediately formed when PET reached 30 vol%. The range of the co-continuous structure of the blend was wider when SEBS-g-MA was added, and the elongation at break also improved as additive content increased, without a significant strength decrease. The divergence of the mechanical properties from the theoretical value, i.e. the value determined by the mixing rule, can be explained by the changing phase structure.Keywords
This publication has 24 references indexed in Scilit:
- On the coarsening of the phase morphology of PP/EVA blends during compounding in a twin screw extruderPolymer Testing, 2014
- High density polyethylene and poly(ethylene terephthalate) in situ sub-micro-fibril blends as a matrix for wood plastic compositesComposites Part A: Applied Science and Manufacturing, 2012
- Binary collision of drops in simple shear flow at finite Reynolds numbers: Geometry and viscosity ratio effectsAdvances in Engineering Software, 2011
- Shear-induced droplet deformation: Effects of confined geometry and viscoelasticityCurrent Opinion in Colloid & Interface Science, 2011
- Morphology and properties of microfibrillar composites based on recycled poly (ethylene terephthalate) and high density polyethyleneComposites Part A: Applied Science and Manufacturing, 2009
- Microstructural evolutions of LDPE/PA6 blends by rheological and rheo-optical analyses: Influence of flow and compatibilizer on break-up and coalescence processesPolymer, 2006
- Postconsumer polyethylene terephthalate (PET)/polyolefin blends through reactive processingJournal of Material Cycles and Waste Management, 2004
- Interfacial tension of polyethylene/polyethylene terephthalate with various compatibilizing agentsJournal of Applied Polymer Science, 1996
- Comparison of compatibilizer effectiveness for PET/HDPE blendsPolymer, 1995
- Morphological origin of super toughness in poly(ethylene terephthalate)/polyethylene blendsJournal of Applied Polymer Science, 1993