Dynamic Modeling and Experimental Validations of Passing Through Critical Speeds by High Acceleration in One-Axis Actively Positioned Bearingless Motors
- 11 May 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (6) , 6956-6964
Abstract
One-axis actively positioned bearingless motors have been studied for industry applications such as pumps and cooling fans. In particular, single-drive bearingless motors have a great advantage of a simple regulation system. Only one three-phase inverter is required for generating torque and active axial force by q - and d -axis currents. On the other hand, radial and tilting motions of the rotor shaft are passively stabilized by passive magnetic bearings. These passive force and torque are just spring force. Inherently, damping force and torque are not generated. As a result, the rotor vibrations in the radial and tilting directions are considerably high at resonant frequencies. In this article, a valuable strategy is proposed to pass through the critical speed by high angular acceleration with a fan blade. The dynamic modeling of the radial and tilting motions is proposed and simulated to find out the possibility to pass through the critical speed. In the experiment, it is demonstrated that a prototype machine of the one-axis actively positioned bearingless motor can successfully pass through the critical speed without touch-down.Keywords
Funding Information
- JSPS KAKENHI (JP17H04916, JP20H02136)
This publication has 18 references indexed in Scilit:
- Coaxial tilt damping coil with additional active actuation capabilities2017
- A novel simplified structure for single-drive bearingless motor2016
- Design of a highly reliable fan with magnetic bearingsProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2015
- A Vibration Reduction Method of One-Axis Actively Position Regulated Single-Drive Bearingless Motor With Repulsive Passive Magnetic BearingsIEEE Transactions on Industry Applications, 2015
- Development of a one-axis actively regulated bearingless motor with a repulsive type passive magnetic bearing2014
- Electrical Design Considerations for a Bearingless Axial-Force/Torque MotorIEEE Transactions on Industry Applications, 2014
- Bearingless 300-W PMSM for Bioreactor MixingIEEE Transactions on Industrial Electronics, 2011
- Vibration Suppression of the Rotating Shaft using the Axial Control of the Repulsive Magnetic BearingJournal of System Design and Dynamics, 2010
- Vibration of a Shaft Passing through a Critical Speed : 2nd Report, Approximate EquationsBulletin of JSME, 1972
- Vibration of a Shaft Passing through a Critical Speed : 1st Report Experiments and Numerical SolutionsBulletin of JSME, 1971