Experimental and Numerical Analysis of Forced Convection in a Horizontal Tube Partially Filled with a Porous Medium under Local Thermal Equilibrium Conditions
Open Access
Abstract
The objective of the present work is to analyze experimentally and numerically the laminar forced convection flow in a horizontal pipe partially filled with a porous medium under constant heat flux and to study the influence of the eccentricity of the porous medium on the results. In a numerical analysis, the governing equations are solved in three dimensions. To simplify the grid generation and the satisfaction of the boundary conditions, conformal mapping is applied to convert the cross-section of the tube in the fluid domain (space between two eccentric circles) into a rectangle, and the equations are solved in a computational domain in this domain. The Darcy–Brinkman–Forchheimer model is applied to simulate the hydrodynamic behavior of the flow in the porous region. Thermal equilibrium between solid and fluid is assumed for the energy equation. A FORTRAN program was developed to solve the equations using the finite volume method and the SIMPLE algorithm. Velocity profile, pressure drop and average Nusselt number are studied in a wide range of Darcy numbers, thickness of porous mediums and eccentricities. The results show that the eccentricity of the porous material reduces the heat transfer coefficient and the pressure drop simultaneously; of course, the reduction in the heat transfer coefficient is less noticeable when the thickness of the porous medium is smaller. For example, at RP = 0.5, when the eccentricity of the porous medium increases up to E = 0.4, the average Nusselt number decreases by 66%, and this reduction for a smaller porous thickness decreases to 11%. The maximum pressure drop reduction for Da = 10−5 and E = 0.4 is 25%.Keywords
This publication has 34 references indexed in Scilit:
- The effect of porous insert position on the enhanced heat transfer in partially filled channelsInternational Communications in Heat and Mass Transfer, 2011
- Three-dimensional numerical analysis of hydrodynamic characteristics of axial groove journal bearings running with ferrofluids under magnetic fieldProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Enhancing heat transfer in the core flow by using porous medium insert in a tubeInternational Journal of Heat and Mass Transfer, 2010
- Heat transfer in parallel plates and circular porous passages with axial conductionInternational Journal of Heat and Mass Transfer, 2006
- An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous mediaInternational Journal of Heat and Mass Transfer, 2004
- Analysis of flow and heat transfer in porous media imbedded inside various-shaped ductsInternational Journal of Heat and Mass Transfer, 2004
- Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layerInternational Journal of Heat and Mass Transfer, 2001
- Forced convection in a porous medium heated by a permeable wall perpendicular to flow direction: analyses and measurementsInternational Journal of Heat and Mass Transfer, 2001
- Transient non-Darcian forced convection flow in a pipe partially filled with a porous materialInternational Journal of Heat and Mass Transfer, 1998
- Laminar forced convection in eccentric annuliInternational Journal of Heat and Mass Transfer, 1971