Non-Destructive Diagnostics in the Assessment of Splice Geometry in Steel Cord Conveyor Belts
Open Access
- 1 May 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (9) , 5034
Abstract
This study presents the results of an investigation into the potential use of the DiagBelt+ magnetic diagnostic system for assessing the quality of conveyor belt splices. Splices in conveyor belts are susceptible to damage and irregularities resulting from assembly errors, improper vulcanization parameters, or unfavorable operational conditions. Detecting geometric deviations from the reference standard after splice fabrication can serve as a component of QA/QC systems. Later deviations may indicate material or fabrication defects. To date, applications of the DiagBelt+ system have been limited to locating damage within the belt and its splices. Recently, efforts have been made to extend the system’s functionality to include splice diagnostics. This study was conducted under laboratory conditions on an ST2500 belt featuring five splices (three bias and two straight splices). Data acquisition was performed under various configurations of measurement parameters, including sensor-to-belt distance, belt travel speed, and system sensitivity threshold. For each splice, the signal width was measured and analyzed as a potential indicator of splice geometry and quality. The results indicate that the DiagBelt+ system can be effectively used for splice diagnostics. Work has commenced on automating the splice quality assessment process.Keywords
All Related Versions
This publication has 28 references indexed in Scilit:
- Magnetic flux detection and identification of bridge cable metal area loss damageMeasurement, 2021
- Analysis of changes in the length of belt sections and the number of splices in the belt loops on conveyors in an underground mineEngineering Failure Analysis, 2019
- Implementation of Industry 4.0 in the belt conveyor transportMATEC Web of Conferences, 2019
- Conveyor Belt 4.02018
- The use of magnetic sensors in monitoring the condition of the core in steel cord conveyor belts – Tests of the measuring probe and the design of the DiagBelt systemMeasurement, 2018
- Developments of rubber material wear in conveyer belt systemTribology International, 2017
- Measurement and simulation of impact wear damage to industrial conveyor beltsWear, 2016
- Ishikawa Diagram2016
- Monitoring broken steel cables in moving elastomer beltsJournal of Physics E: Scientific Instruments, 1985
- Testing steel-cord belt splices with a magnetic conveyor belt monitorJournal of Nondestructive Evaluation, 1985