Synthesis of Specific ZnF Based Nanoparticles (ZnFe2O4): Antimicrobial Properties, Surface Characteristics, and Adsorption Activity for AB 29 Textile Dye
Authors:
Open Access
- 2 July 2020
- journal article
- research article
- Published by Wiley in Journal of Nanotechnology
- Vol. 2020, 1-9
Abstract
In this investigation, the color removal from synthetic wastewaters containing Acid Blue 29 (AB 29) dye was investigated by ZnF-based nanomaterials (ZnFe2O4) synthesized by the coprecipitation method in a batch system. SEM, FT–IR, and XRD analysis were used for the characterization of the nanoparticles (before and after adsorption), and the analysis results were compared with each other. The parameters such as pH, temperature, dye concentration, and nanoparticle dosage affecting color removal were examined systematically, and favorable color removal conditions were determined by the classical approach. From the experimental results, the favorable conditions with high removal efficiency for the adsorption were determined: removal temperature 35°C and the removal pH 2.0. At these experimental conditions, the adsorbed dye amount per unit mass of adsorbent and the percentage dye removal were determined as 1489.79 mg·g−1 and 98.83%, respectively. In the other part of the research, three different isotherm models (Langmuir, Freundlich, and Temkin) were used to examine the adsorption equilibrium data. Langmuir and especially Freundlich linear isotherm models provided the highest R2 regression coefficients, successfully. The kinetic data was evaluated by pseudo-first-order and pseudo-second-order kinetic model approach. It was observed that pseudo-second-order kinetic model best represented AB 29-ZnF adsorption kinetic data. The determined thermodynamic parameters such as ΔH, ΔS, and ΔG were proved that the AB 29-ZnF adsorption system was an exothermic (ΔH < 0), spontaneous, thermodynamically favorable (ΔG < 0), and stabilized system without any structural changes in sorbate and sorbents (ΔS<0).Keywords
Funding Information
- Mersin Üniversitesi (2017-1-TP2-2266)
This publication has 28 references indexed in Scilit:
- Photocatalytic removal of hazardous dye cyanosine from industrial waste using titanium dioxideJournal of Hazardous Materials, 2008
- TiO2 mediated photocatalytic degradation studies of Reactive Red 198 by UV irradiationJournal of Hazardous Materials, 2007
- Adsorption of a hazardous dye, erythrosine, over hen feathersJournal of Colloid and Interface Science, 2006
- Process development for the removal and recovery of hazardous dye erythrosine from wastewater by waste materials—Bottom Ash and De-Oiled Soya as adsorbentsJournal of Hazardous Materials, 2006
- Adsorption isotherms, kinetics and column operations for the removal of hazardous dye, Tartrazine from aqueous solutions using waste materials—Bottom Ash and De-Oiled Soya, as adsorbentsJournal of Hazardous Materials, 2006
- Titanium dioxide thin films: the effect of the preparation method in their photocatalytic propertiesJournal of Molecular Catalysis A: Chemical, 2005
- Use of waste materials—Bottom Ash and De-Oiled Soya, as potential adsorbents for the removal of Amaranth from aqueous solutionsJournal of Hazardous Materials, 2005
- Advanced oxidation of a reactive dyebath effluent: comparison of O3, H2O2/UV-C and TiO2/UV-A processesWater Research, 2002
- Removal of heavy metal ions from aquatic solutions by membrane chromatographySeparation and Purification Technology, 2000
- The degradation of dyestuffs: Part II Behaviour of dyestuffs in aerobic biodegradation testsChemosphere, 1986