A Physical Mechanism for Deposit Formation in a Combustion Chamber
Author:
- 1 October 1994
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Combustion chamber deposits in an internal combustion engine are known to impair engine performance. Using a variable temperature probe and retrievable sampling coupons, this study shows that the deposit-forming rate is inversely related to surface temperature, and directly related to the stabilized deposit weight. Together with the well-recognized fact that deposits are good thermal insulators, a deposit-forming mechanism is proposed. As combustion chamber deposits form, in essence the chamber surface is coated with thermal insulators, layer after layer. Consequently, the surface temperature will rise as the deposit grows. The previously derived critical surface temperature of 310°C is found to be valid in this study for fuel-derived deposits. Furthermore, a critical surface temperature also exists for oil-derived deposits, except that the critical surface temperature is about 60°C higher than that for fuel-derived deposits.Keywords
This publication has 13 references indexed in Scilit:
- Two-Dimensional Temperature Distributions of Combustion Chamber Surfaces in a Firing Spark Ignition EngineProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 1994
- Octane Requirement Increase of 1990 and 1991 Model Vehicles1992
- Investigation of Combustion-Chamber Deposit Thermal Behavior Utilizing Optical RadiationMeasurements in a Fired EngineCombustion Science and Technology, 1988
- The Effect of Engine Deposit Layers on Hydrocarbon Emissions from Closed Vessel CombustionCombustion Science and Technology, 1986
- The Chemistry of Internal Combustion Engine Deposits — I. Microanalysis, Thermogravimetric Analysis, and Infrared Spectroscopy1985
- Effects of Combustion Chamber Deposit Location and Composition1985
- The Effect of the Combustion Chamber Deposits on Octane Requirement Increase and Fuel Economy1985
- An Investigation of Preignition in EnginesSAE International Journal of Advances and Current Practices in Mobility, 1954
- Combustion-Chamber Deposition and KnockSAE International Journal of Advances and Current Practices in Mobility, 1953
- Combustion-Chamber Deposition and Power LossSAE International Journal of Advances and Current Practices in Mobility, 1952