A Low Torque Ripple Direct Torque Control Method for Interior Permanent Magnet Motor
Open Access
- 3 March 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (5) , 1723
Abstract
This paper proposes a simple method to generate stable voltage commands for permanent magnet synchronous motors to achieve low torque ripple based on space vector modulation direct torque control (SVM-DTC). The relationship between applied voltage and electromagnetic torque is first analyzed and the effect of the voltage and flux linkage on torque ripple is discussed. Then, the new method is developed to reduce torque ripple by giving low-fluctuation voltage commands to the voltage source inverter. The magnitude of the voltage command is calculated by avoiding the effect of flux linkage angle that can be estimated inaccurately during motor operation. Therefore, the fluctuation of the voltage command can be significantly reduced. In order to validate the proposed method, Simulink is first used for simulation and the performance of the proposed method is evaluated. It is found that the torque ripple can be substantially reduced while keeping a low switching frequency and improving system response. Then, a hardware-in-the-loop (HIL) technique is applied to test the developed algorithm that is written into a Texas Instruments microcontroller. This validates the simulation results and the proposed method.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 107-2622-E-006-005-CC2)
This publication has 19 references indexed in Scilit:
- Direct Calculation Method of Reference Flux Linkage for Maximum Torque per Ampere Control in DTC-Based IPMSM DrivesIEEE Transactions on Power Electronics, 2016
- Maximum Torque Per Ampere Control of a Direct Torque-Controlled PMSM in a Stator Flux Linkage Synchronous FrameIEEE Transactions on Industry Applications, 2016
- Minimizing Torque and Flux Ripples and Improving Dynamic Response of PMSM Using a Voltage Vector With Optimal ParametersIEEE Transactions on Industrial Electronics, 2015
- Mathematical Model for MTPA Control of Permanent-Magnet Synchronous Motor in Stator Flux Linkage Synchronous FrameIEEE Transactions on Industry Applications, 2015
- Mechanical Parameter Estimation of Permanent-Magnet Synchronous Machines With Aiding From Estimation of Rotor PM Flux LinkageIEEE Transactions on Industry Applications, 2015
- Direct Torque Control of Permanent-Magnet Synchronous Machine Drives With a Simple Duty Ratio RegulatorIEEE Transactions on Industrial Electronics, 2014
- Two-Level VSC Based Predictive Direct Torque Control of the Doubly Fed Induction Machine With Reduced Torque and Flux Ripples at Low Constant Switching FrequencyIEEE Transactions on Power Electronics, 2008
- Speed-sensorless direct torque control of induction motors using an adaptive flux observerIEEE Transactions on Industry Applications, 2000
- Direct self-control (DSC) of inverter-fed induction machineIEEE Transactions on Power Electronics, 1988
- A New Quick-Response and High-Efficiency Control Strategy of an Induction MotorIEEE Transactions on Industry Applications, 1986