Influence of the mercury vapor pressure on the isothermal growth of HgTe over CdTe

Authors:

Abstract
The theory developed in the preceding article is applied to the epitaxial growth of HgTe on a CdTe substrate under isothermal EDRI conditions. In the absence of excess mercury, two different growth conditions can be distinguished. In the high‐temperature case, pure HgTe is present at the surface of the epitaxial layer and the layer thickness is proportional to the square root of the Hg vacancy diffusion coefficient and of the vacancy concentration gradient. At low temperature (D (varying between 0.5 μ2/h for cadmium‐rich alloys and 100 μ2/h for mercury‐rich compositions) decreases with increasing excess mercury pressure. This variation of the interdiffusion coefficient (only a high‐temperature growth is considered here) leads to the final expression for the layer thickness as a function of the excess mercury pressure p0:e=e0√t exp(−kp0). From this formula it is seen that the time dependence of the layer thickness is not influenced by the presence of excess mercury. The surface composition depends only on p0 and not on time. Up to 4 atm, the cadmium content at the surface increases linearly with p0. For p0 ≳ 4 atm the growth of the layer is completely inhibited. These results are discussed on the basis of a mercury vacancy balance in the substrate and in the epitaxial layer. Vacancies created by the Kirkendall effect either diffuse towards the epitaxial layer surface or are annihilated by interaction with mercury diffused from the vapor phase. From the discussion of both mechanisms (taking into account that the layer thickness increases as √t) it follows that the average vacancy concentration and, consequently, the interdiffusion coefficient are independent of time, as is experimentally observed.