Quantitative Description of the Pull-Out Behavior of Crimped Yarns from Cement Matrix
Authors:
- 1 December 2003
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 15 (6) , 537-544
Abstract
The object of the present paper was to quantify the effect of crimping of a low modulus polymer yarn on the bonding with a cement paste matrix. Crimping of this kind has been evaluated within the context of optimizing the structure of woven fabric to obtain a strain hardening composite. The concept applied here was based on existing models developed for straight yarns. These models resolve between two stages: the elastic stage (adhesion) and the slip stage (friction). A similarity in the shape of the pull-out load versus slip curve of straight yarns and crimped yarns was found, suggesting that a modeling approach for straight fibers, which consider adhesional and frictional resistance, can also be applied for the crimped yarns. The effect of the yarn crimping on calculated adhesional and frictional components, and was estimated, showing a marked increase with yarn density for both types of bonding mechanisms. These values are considered as equivalent values since their physical significance is limited. Empirical linear correlations was found between the equivalent adhesional and frictional bond strengths and the crimp density. These empirical relations were combined with equation describing the shape of pull-out curves, to calculate the pull-out curves of the crimped yarns. The agreement with the experimental curve was reasonably good.
Keywords
This publication has 13 references indexed in Scilit:
- Reinforcement of cementitious matrices by warp knitted fabricsMaterials and Structures, 1998
- ENHANCED BONDING OF LOW MODULUS POLYMER FIBERS-CEMENT MATRIX BY MEANS OF CRIMPED GEOMETRYCement and Concrete Research, 1997
- Fiber Pullout and Bond Slip. I: Analytical StudyJournal of Structural Engineering, 1991
- Macromechanics Modelling of Steel Fiber Pull-Out from Cementitious Matrices1991
- Pull-out work of steel fibers from cementitious composites: Analytical investigationCement and Concrete Composites, 1991
- Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrixJournal of Materials Science, 1984
- Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrixJournal of Materials Science, 1984
- Multiple cracking in aligned polypropylene fibre reinforced cement compositesJournal of Materials Science, 1981
- Some theoretical considerations of fibre pull-out from an elastic matrixJournal of Materials Science, 1972
- The elasticity and strength of paper and other fibrous materialsBritish Journal of Applied Physics, 1952