Investigation of Two-Phase Flow in a Hydrophobic Fuel-Cell Micro-Channel
Open Access
Abstract
This paper presents a quantitative visualization study and a theoretical analysis of two-phase flow relevant to polymer electrolyte membrane fuel cells (PEMFCs) in which liquid water management is critical to performance. Experiments were conducted in an air-flow microchannel with a hydrophobic surface and a side pore through which water was injected to mimic the cathode of a PEMFC. Four distinct flow patterns were identified: liquid bridge (plug), slug/plug, film flow, and water droplet flow under small Weber number conditions. Liquid bridges first evolve with quasi-static properties while remaining pinned; after reaching a critical volume, bridges depart from axisymmetry, block the flow channel, and exhibit lateral oscillations. A model that accounts for capillarity at low Bond number is proposed and shown to successfully predict the morphology, critical liquid volume and evolution of the liquid bridge, including deformation and complete blockage under specific conditions. The generality of the model is also illustrated for flow conditions encountered in the manipulation of polymeric materials and formation of liquid bridges between patterned surfaces. The experiments provide a database for validation of theoretical and computational methods.Keywords
This publication has 65 references indexed in Scilit:
- Predictive model for the design of reactive micro-separationsSeparation and Purification Technology, 2019
- Regimes of two-phase flow in micro- and minichannels (review)Thermophysics and Aeromechanics, 2015
- Water Slug to Drop and Film Transitions in Gas-Flow ChannelsLangmuir, 2013
- Two-Phase Liquid Cooling for Thermal Management of IGBT Power Electronic ModuleJournal of Electronic Packaging, 2013
- Start-up, heat transfer and flow characteristics of silicon-based micro pulsating heat pipesInternational Journal of Heat and Mass Transfer, 2012
- Experimental investigation of water droplet emergence in a model polymer electrolyte membrane fuel cell microchannelJournal of Power Sources, 2012
- Macro-to-microchannel transition in two-phase flow: Part 1 – Two-phase flow patterns and film thickness measurementsExperimental Thermal and Fluid Science, 2011
- Computational modelling of polymer electrolyte membrane (PEM) fuel cells: Challenges and opportunitiesEnergy, 2007
- In situ visualization study of CO2 gas bubble behavior in DMFC anode flow fieldsJournal of Power Sources, 2005
- An experimental study of convective heat transfer in silicon microchannels with different surface conditionsInternational Journal of Heat and Mass Transfer, 2003