The Kinetics of Dynamic Recrystallization of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel
- 12 October 2018
- journal article
- conference paper
- Published by Wiley in Steel Research International
- Vol. 90 (6)
Abstract
The paper studies the dynamic recrystallization of nitrogen‐alloyed low‐nickel Fe–16Cr–xMn–4Ni–0.05C–0.17N stainless steel in dependence of Mn with different contents from 2 to 6 wt% by isothermal compression tests. The tests are performed at three temperatures 970, 1050, 1150 °C and three strain rates 0.1, 1, and 10 s−1 on a Gleeble HDS V40. By means of the experimental results, it could be shown that various Mn content has only a slight effect on the peak stress and peak strain. The critical stress indicating the onset of dynamic recrystallization is determined by second derivative of the third‐order polynomial. The dynamic recrystallization is modeled based on the JMAK equations, which is expanded by means of including the linear dependency of material constants of the Mn content. The predicted DRX curves exhibit good agreement with the experimental ones.Keywords
This publication has 22 references indexed in Scilit:
- Nitrogen in chromium–manganese stainless steels: a review on the evaluation of stacking fault energy by computational thermodynamicsScience and Technology of Advanced Materials, 2013
- The kinetics of dynamic recrystallization of 42CrMo steelMaterials Science and Engineering: A, 2012
- The rate of dynamic recrystallization in 17-4 PH stainless steelMaterials & Design (1980-2015), 2010
- Prediction of the critical conditions for initiation of dynamic recrystallizationMaterials & Design (1980-2015), 2010
- Nichtrostende Stähle mit TRIP/TWIP/SBIP‐EffektMaterialwissenschaft und Werkstofftechnik, 2009
- Predicting the Critical Stress for Initiation of Dynamic RecrystallizationISIJ International, 2006
- High Strength Stainless Steels Manufactured by Temperature Controlled RollingMaterials Science Forum, 2003
- Initiation of Dynamic Recrystallization in Constant Strain Rate Hot DeformationISIJ International, 2003
- Effect of manganese on recrystallisation kinetics of niobium microalloyed steelMaterials Science and Technology, 2002
- The Adiabatic Correction Factor for Deformation Heating During the Uniaxial Compression TestJournal of Materials Engineering and Performance, 2001