Aspects of the suspension system for GEO 600
Authors:
- 1 August 1998
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 69 (8) , 3055-3061
Abstract
The GEO 600 gravitational wave detector is currently under construction in Germany. To ensure that the detector sensitivity is not limited by seismic noise above 50 Hz a significant degree of seismic isolation has to be provided for each test mass. To achieve this level of isolation each test mass, which will be made from fused silica (mass ∼14 kg), will be suspended as the final stage of a triple pendulum from an isolation stack consisting of layers of stainless steel masses and graphite loaded silicone rubber. Extending from the stack will be three cantilever springs supporting an upper mass from which a double pendulum stage will be suspended. This double pendulum will incorporate cantilever springs in the upper stage in order to enhance the vertical isolation, and will use fused silica fibers in the lower pendulum stage in order to minimize thermal noise from the pendulum modes. The expected performance from this arrangement of stacks, vertical spring stages, and double pendulums should achieve our goals for seismic isolation.Keywords
This publication has 13 references indexed in Scilit:
- Q factor measurements on prototype fused quartz pendulum suspensions for use in gravitational wave detectorsPhysics Letters A, 1997
- Status of TAMA projectClassical and Quantum Gravity, 1997
- The quality factor of natural fused quartz ribbons over a frequency range from 6 to 160 HzPhysics Letters A, 1997
- Gravitational-wave sourcesClassical and Quantum Gravity, 1996
- A passive vibration isolation stack for LIGO: Design, modeling, and testingReview of Scientific Instruments, 1996
- The Glasgow 10 m prototype laser interferometric gravitational wave detectorReview of Scientific Instruments, 1995
- Isolation of test masses in the advanced laser interferometric gravitational-wave antennaeReview of Scientific Instruments, 1994
- Automatic alignment of optical interferometersApplied Optics, 1994
- Experimental demonstration of an automatic alignment system for optical interferometersApplied Optics, 1994
- Thermal noise in mechanical experimentsPhysical Review D, 1990