The Effect of The Bearing Capacity of Sub-Grade Soil on The Thickness and Cost of The Superstructure of Chip Seals
Open Access
- 27 June 2023
- journal article
- research article
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 12 (2) , 376-386
Abstract
Applied for preventative treatment of an existing road or to overlay low-trafficked roads. The thickness of the superstructure of a chip seal pavement is directly related to the bearing capacity of sub-grade soil. The bearing capacity of soil is represented by Resilient Modulus (MR) for the design of the thickness of layers. This study has focused on the effect of the bearing capacity of sub-grade soil on the thickness and cost of superstructures of chip seals. In addition, linear regression analysis was performed to investigate the relationship between the bearing capacity of the subgrade soil and the thickness of the superstructure. Two-dimensional numerical modeling was performed with the layer thicknesses found according to the resilient modulus. It was indicated that there was a strong correlation between the bearing capacity of sub-grade soil and the thickness of superstructures of chip seals with high R-square values. An increase in the bearing capacity of the subgrade resulted in a decrease in the thickness of the superstructures of the chip seal. So, it has importance in the aspect of economical to select the most proper soil that will be used in the superstructure of chip seals by taking care of the environment and conditions. In addition, Plaxis 2D modeling shows that a double-chip seal has less deformation and better bearing capacity than a single-chip seal.Keywords
This publication has 17 references indexed in Scilit:
- A Sustainability Perspective for Unbound Reclaimed Asphalt Pavement (RAP) as a Pavement Base MaterialSustainability, 2018
- Chip seal aggregate evaluation and successful roads preservationConstruction and Building Materials, 2018
- Comparative laboratory evaluation of macro texture depth of chip seal samples using sand patch and outflow meter test methods2017
- The effect of aggregate type, size and polishing levels to skid resistance of chip sealsMaterials and Structures, 2017
- An Evaluation of the Resilient Modulus and Permanent Deformation of Unbound Mixtures of Granular Materials and Rubber Particles from Scrap Tyres to be Used in Subballast LayersTransportation Research Procedia, 2016
- Feasibility of Using 4th Power Law in Design of Plastic Deformation Resistant Low Volume RoadsProcedia Engineering, 2016
- Investigation of chip seal performance under cold climate conditionsScience and Engineering of Composite Materials, 2015
- A Comparison Study of Friction Measurements for Chip SealJournal of Testing and Evaluation, 2012
- Stabilization of subbase layer materials with waste pumice in flexible pavementBuilding and Environment, 2008
- Planning Roads for Rural CommunitiesTransportation Research Record: Journal of the Transportation Research Board, 2007