Design and analysis of a low‐pass filter utilizing a slotted‐ground‐plane resonator
Authors:
- 8 March 2018
- journal article
- research article
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 60 (4) , 905-915
Abstract
In this article, the frequency‐response analysis of an H‐shaped slot resonator etched in the ground plane is shown by using transmission‐line analysis and even‐and‐odd mode analysis. Based on a stepped‐impedance structure, we systematically derive a resonance analysis of the slot resonator, addressing resonance conditions, and harmonic responses. The design rule of the slotted‐ground‐plane resonator was successfully derived. The design equations and figures regarding the impedance ratio of the H‐shaped slot resonator have been analytically proven so that the resonant modes can be predicted without electromagnetism simulation software. Aided by the proposed design procedure, we demonstrate a low‐pass filter (LPF) with a unit‐cell topology, which consists of a uniform‐impedance transmission line, an H‐shaped slot resonator, and two C‐like slot resonators which are also designed with the same design rule. By embedding the two C‐like slot resonators inside the H‐shaped slot resonator, several additional transmission zeros are excited in frequency characteristics so that the device achieves wideband rejection performance. Finally, to enhance the frequency characteristics of the LPF, a modified case is also presented by adding a rectangular stub at the transmission line.Keywords
This publication has 19 references indexed in Scilit:
- Design of the small low‐pass filter by utilizing the slotted‐ground‐plane resonatorMicrowave and Optical Technology Letters, 2013
- A MULTI-BAND MEANDERED SLOTTED-GROUNDPLANE RESONATOR AND ITS APPLICATION OF LOW-PASS FILTERProgress In Electromagnetics Research, 2011
- Application of a defected ground structure and alternative transmission line for designing a quasi-elliptic lowpass filter and reduction of insertion lossInternational Journal of RF and Microwave Computer-Aided Engineering, 2010
- Compact lowpass filter with sharp transition knee by utilising a quasi- π -slot resonator and open stubsIET Microwaves, Antennas & Propagation, 2010
- Investigation of novel tapered hybrid defected ground structure (DGS)International Journal of RF and Microwave Computer-Aided Engineering, 2005
- An Input-Impedance-Based Circuit Model for Coplanar Waveguide-to-Slotline T-JunctionIEEE Transactions on Microwave Theory and Techniques, 2004
- A design of the novel coupled-line bandpass filter using defected ground structure with wide stopband performanceIEEE Transactions on Microwave Theory and Techniques, 2002
- Design of lowpass filters using defected ground structure and compensated microstrip lineElectronics Letters, 2002
- A design of the low-pass filter using the novel microstrip defected ground structureIEEE Transactions on Microwave Theory and Techniques, 2001
- Geometrical structures and fundamental characteristics of microwave stepped-impedance resonatorsIEEE Transactions on Microwave Theory and Techniques, 1997