Growth kinetics, properties, performance, and stability of atomic layer deposition Zn–Sn–O buffer layers for Cu(In,Ga)Se2 solar cells
- 8 October 2011
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 20 (7) , 883-891
Abstract
A new atomic layer deposition process was developed for deposition of Zn–Sn–O buffer layers for Cu(In,Ga)Se2 solar cells with tetrakis(dimethylamino) tin, Sn(N(CH3)2)4, diethyl zinc, Zn(C2H5)2, and water, H2O. The new process gives good control of thickness and [Sn]/([Sn] + [Zn]) content of the films. The Zn–Sn–O films are amorphous as found by grazing incidence X‐ray diffraction, have a high resistivity, show a lower density compared with ZnO and SnOx, and have a transmittance loss that is smeared out over a wide wavelength interval. Good solar cell performance was achieved for a [Sn]/([Sn] + [Zn]) content determined to be 0.15–0.21 by Rutherford backscattering. The champion solar cell with a Zn–Sn–O buffer layer had an efficiency of 15.3% (Voc = 653 mV, Jsc(QE) = 31.8 mA/cm2, and FF = 73.8%) compared with 15.1% (Voc = 663 mV, Jsc(QE) = 30.1 mA/cm2, and FF = 75.8%) of the best reference solar cell with a CdS buffer layer. There is a strong light‐soaking effect that saturates after a few minutes for solar cells with Zn–Sn–O buffer layers after storage in the dark. Stability was tested by 1000 h of dry heat storage in darkness at 85 °C, where Zn–Sn–O buffer layers with a thickness of 76 nm retained their initial value after a few minutes of light soaking. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 27 references indexed in Scilit:
- Evaluation of Zn-Sn-O buffer layers for CuIn0.5Ga0.5Se2 solar cellsProgress in Photovoltaics: Research and Applications, 2010
- Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2based thin film photovoltaics: present status and current developmentsProgress in Photovoltaics: Research and Applications, 2010
- CIGS absorbers and processesProgress in Photovoltaics: Research and Applications, 2010
- Solar cell efficiency tables (version 36)Progress in Photovoltaics: Research and Applications, 2010
- The Zn(S,O,OH)/ZnMgO buffer in thin film Cu(In,Ga)(S,Se)2‐based solar cells part I: Fast chemical bath deposition of Zn(S,O,OH) buffer layers for industrial application on Co‐evaporated Cu(In,Ga)Se2 and electrodeposited CuIn(S,Se)2 solar cellsProgress in Photovoltaics: Research and Applications, 2009
- Buffer layers in Cu(In,Ga)Se2 solar cells and modulesThin Solid Films, 2005
- Cd 2 + ∕ N H 3 -treatment of Cu(In,Ga)(S,Se)2: Impact on the properties of ZnO layers deposited by the ion layer gas reaction methodJournal of Applied Physics, 2004
- Alternative buffers for chalcopyrite solar cellsSolar Energy, 2004
- High‐efficiency copper indium gallium diselenide (CIGS) solar cells with indium sulfide buffer layers deposited by atomic layer chemical vapor deposition (ALCVD)Progress in Photovoltaics: Research and Applications, 2003
- On the CdS/CuInSe2 conduction band discontinuityApplied Physics Letters, 1995