Abstract
Summary: Highly porous poly[(vinylidene fluoride)‐co‐hexafluoropropylene] (PVdF‐HFP)/TiO2 membranes were prepared by a phase inversion technique, using dimethyl acetamide (DMAc) as a solvent and water as a non‐solvent. Their physical and electrochemical properties were then characterized in terms of thermal and crystalline behavior, as well as ionic conductivity after absorbing an electrolyte solution of 1 M LiPF6 dissolved in an equal weight mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC). For comparison, cast films and their electrolytes were also made by a conventional casting method without using the water non‐solvent. In contrast to the case of using N‐methyl‐2‐pyrrolidone (NMP) as a solvent, the PVdF‐HFP/TiO2 composite electrolytes, obtained using DMAc, exhibited superior properties of electrochemical stability and interfacial resistance with a lithium electrode but had lower ionic conductivities. It was also demonstrated that the phase inversion membrane was more effective than the cast film as the polymer electrolyte of a lithium rechargeable battery. As a result, a phase inversion membrane with 50 wt.‐% TiO2 was demonstrated to be the optimal choice for application in a lithium rechargeable battery. Time evolutions of interfacial resistance between polymer electrolyte and lithium electrodes. magnified image Time evolutions of interfacial resistance between polymer electrolyte and lithium electrodes.

This publication has 21 references indexed in Scilit: