Dynamic Constitutive Model of Ultra-High Molecular Weight Polyethylene (UHMWPE): Considering the Temperature and Strain Rate Effects
Open Access
Abstract
The temperature and strain rate significantly affect the ballistic performance of UHMWPE, but the deformation of UHMWPE under thermo-mechanical coupling has been rarely studied. To investigate the influences of the temperature and the strain rate on the mechanical properties of UHMWPE, a Split Hopkinson Pressure Bar (SHPB) apparatus was used to conduct uniaxial compression experiments on UHMWPE. The stress–strain curves of UHMWPE were obtained at temperatures of 20–100 °C and strain rates of 1300–4300 s−1. Based on the experimental results, the UHMWPE belongs to viscoelastic–plastic material, and a hardening effect occurs once UHMWPE enters the plastic zone. By comparing the stress–strain curves at different temperatures and strain rates, it was found that UHMWPE exhibits strain rate strengthening and temperature softening effects. By modifying the Sherwood–Frost model, a constitutive model was established to describe the dynamic mechanical properties of UHMWPE at different temperatures. The results calculated using the constitutive model were in good agreement with the experimental data. This study provides a reference for the design of UHMWPE as a ballistic-resistant material.Keywords
Funding Information
- Graduate Research and Innovation Projects of Jiangsu Province (KYCX20_0318)
This publication has 16 references indexed in Scilit:
- Static and Dynamic Properties of Semi-Crystalline PolyethylenePolymers, 2016
- Constitutive modeling of the rate-dependent resilient and dissipative large deformation behavior of a segmented copolymer polyureaSoft Matter, 2013
- An Improved Non-Affine Arruda-Boyce Type Constitutive Model for Collagen NetworksBiophysical Journal, 2013
- Bergström–Boyce model for nonlinear finite rubber viscoelasticity: theoretical aspects and algorithmic treatment for the FE methodComputational Mechanics, 2009
- A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperaturesPolymer, 2005
- Compressive behavior of 3-D angle-interlock woven fabric composites at various strain ratesPolymer Testing, 2005
- Constitutive modeling of ultra-high molecular weight polyethylene under large-deformation and cyclic loading conditionsBiomaterials, 2002
- Constitutive modeling and simulation of energy absorbing polyurethane foam under impact loadingPolymer Engineering & Science, 1992
- Mechanical Behavior of Foamed Materials Under Dynamic CompressionJournal of Cellular Plastics, 1974
- The temperature dependence of yield of polycarbonate in uniaxial compression and tensile testsJournal of Materials Science, 1972