Optical monitoring of polypropylene injection molding
Authors:
- 1 July 1999
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 39 (7) , 1291-1302
Abstract
We have constructed an optical fiber sensor for monitoring injection molding and we have developed a model to describe sensor behavior. The sensor consists of a sapphire window at the end of a sleeved ejector pin into which an optical fiber is inserted. The optical view with this sensor is through the thickness of the molded product. The measured optical signal was light that transmitted through the resin, reflected off the back wall of the mold, and retraced its path through the resin to the optical sensor, i.e., light transmitted through twice the thickness of the resin. While monitoring polypropylene during the packing and cooling phase of the molding cycle, we observed a decrease in light intensity due to scattering of light by the growing microcrystals. A characteristic minimum in the transmitted light intensity versus time curve is attributed to scattering by growing crystalling spherulites at the core of the molded product. Cavity pressure was also measured and was found to be an essential parameter in the process model. The model illustrates how temperature, pressure, and crystallinity affect the detected light intensity and clarifies the roles that temperature and pressure play in the crystallization process.Keywords
This publication has 13 references indexed in Scilit:
- Fluorescence monitoring of polymer injection molding: Model developmentPolymer Engineering & Science, 1997
- Injection molding of semicrystalline polymers. II. Modeling and experimentsJournal of Applied Polymer Science, 1995
- Injection molding of semicrystalline polymers. I. Material characterizationJournal of Applied Polymer Science, 1995
- In‐line optical monitoring of polymer injection moldingPolymer Engineering & Science, 1994
- Equation of state for polymer liquidsJournal of Applied Polymer Science, 1985
- Pressure–volume–temperature relationships of solid and molten polypropylene and poly(butene-1)Journal of Applied Polymer Science, 1979
- Nucleation and crystal growth in sheared poly(1‐butene) meltsJournal of Polymer Science: Polymer Symposia, 1978
- Effect of interference between anisotropic scattering entities on light scattering from polymer films. II. The correlation function approachJournal of Polymer Science: Polymer Physics Edition, 1974
- Temperature dependence of the growth rate of spherulitesJournal of Polymer Science Part A-2: Polymer Physics, 1968
- On the crystallization of polyethyleneJournal of Polymer Science, 1960