A CMOS-Integrated MEMS Platform for Frequency Stable Resonators—Part II: Design and Analysis
- 30 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 28 (5) , 755-765
Abstract
The Part II of this paper presents the numerical model and experimental validations of the CMOS-MEMS resonant transducers fabricated by a reliable TiN-composite (TiN-C) platform. To characterize the frequency behavior of the proposed resonator, an analytical model based on average displacement is used to determine the equivalent lumped parameters of the proposed devices. Considering the free-free beam (FFB) design elaborated in Part I, the oxide fin provides a very strong boundary restriction, which forces the vibration like a short clamped-clamped beam (CCB) combined with two additional tip cantilevers. This segmented analytical model shows a good agreement with our measurement results. In addition, the implementation of TiN-to-TiN transduction gap and oxide-rich composite structure has enabled a deep sub-micron (<400 nm) gap capacitive resonators and controllable temperature-dependent response while attaining a low frequency drift over time due to mitigation of dielectric charging. Although the constituent materials of the CMOS-MEMS resonator are still limited by commercial foundry service, a low-temperature coefficient of frequency (TCf) is achievable by taking temperature coefficient of Young's modulus (TCE), the coefficient of thermal expansion (CTE), and residual stress of standard BEOL into consideration. As a result, the proposed TiN-C pseudo free-free beam (PFFB) resonator shows the lowest passively compensated TCf of 0.6 ppm/K in CMOS-MEMS technology to date, revealing the excellent frequency stability over temperature and time for practical applications in the future.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 103-2221-E-007-113-MY3)
- Toward World-Class University Project
This publication has 22 references indexed in Scilit:
- Statistical characterizaton of a CMOS-MEMS resonator for monolithic ovenized oscillator applications2015
- A single-chip oscillator based on a deep-submicron gap CMOS-MEMS resonator array with a high-stiffness driving scheme2015
- A Vertically Coupled MEMS Resonator Pair for Oscillator ApplicationsJournal of Microelectromechanical Systems, 2015
- Dual-clock with single and monolithical 0-level vacuum packaged MEMS-on-CMOS resonator2015
- Design and Characterization of a Dual-Mode CMOS-MEMS Resonator for TCF ManipulationJournal of Microelectromechanical Systems, 2014
- A Monolithic CMOS-MEMS Oscillator Based on an Ultra-Low-Power Ovenized Micromechanical ResonatorJournal of Microelectromechanical Systems, 2014
- Temperature dependence of TiN elastic constants fromab initiomolecular dynamics simulationsPhysical Review B, 2013
- Ultrathin TiN Membranes as a Technology Platform for CMOS‐Integrated MEMS and BioMEMS DevicesAdvanced Functional Materials, 2011
- A CMOS–MEMS RF-Tunable Bandpass Filter Based on Two High- $Q$ 22-MHz Polysilicon Clamped-Clamped Beam ResonatorsIEEE Electron Device Letters, 2009
- Thermal stability of α-titanium in contact with titanium nitrideJournal of Applied Physics, 1996