Finite element analysis of flexural test of additively manufactured components fabricated by fused deposition modelling
Authors:
- Chaitanya PatilCPChaitanya Patil
- Pushkaraj D. SonawanePSPushkaraj D. Sonawane
- Mahesh NaikMNMahesh Naik
- D. G. ThakurDTD. G. Thakur
- 7 December 2020
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2311 (1) , 070026
Abstract
Additive manufacturing (AM) is the industrial name of 3D printing, which can fabricate the complex geometry model easily. Fused Deposition Modeling (FDM) is an AM technique used for 3D component printing due to its low cost and good strength. The mechanical properties of the FDM specimens were evaluated experimentally through a tensile test. Polylactic acid (PLA), which is a thermoplastic material, is used in present investigation. It is one of the suitable materials for the FDM technique. It is a biodegradable material produced from renewable resources. The Standard tensile test was conducted on the basis of the ASTM D638 standard for the PLA specimens with a 100% infill density. The flexural specimen was modeled in accordance with the ASTM D790 standard and the material properties derived from the experiments were used for finite element analysis. Further, the finite element analysis of the flexural test is performed to examine the flexural strength of FDM components.Keywords
This publication has 15 references indexed in Scilit:
- Numerical and experimental studies of additively manufactured polymers for enhanced fracture propertiesEngineering Fracture Mechanics, 2018
- Comparison ofblack-grey-white boxapproach in system identification of a flight vehicleJournal of Physics: Conference Series, 2018
- A Case Study of 3D Printed PLA and Its Mechanical PropertiesMaterials Today: Proceedings, 2018
- Experimental Optimization of Fused Deposition Modelling Processing Parameters: A Design-for-Manufacturing ApproachProcedia Manufacturing, 2017
- An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental studyInternational Journal of Mechanical Sciences, 2017
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive reviewAdvanced Drug Delivery Reviews, 2016
- Effects of part build orientations on fatigue behaviour of FDM-processed PLA materialProgress in Additive Manufacturing, 2015
- Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABSMaterials, 2015
- Structure–mechanical property relationship in fused deposition modellingMaterials Science and Technology, 2015
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditionsMaterials & Design (1980-2015), 2014