Chlorination Design for Highly Stable Electrolyte toward High Mass Loading and Long Cycle Life Sodium‐Based Dual‐Ion Battery
Authors:
- 1 May 2024
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 36 (27) , e2402702
Abstract
Sodium‐based dual ion batteries (SDIBs) have garnered significant attention as novel energy storage devices offering the advantages of high‐voltage and low‐cost. Nonetheless, conventional electrolytes exhibit low resistance to oxidation and poor compatibility with electrode materials, resulting in rapid battery failure. In this study, for the first time, a chlorination design of electrolytes for SDIB, is proposed. Using ethyl methyl carbonate (EMC) as a representative, chlorine (Cl)‐substituted EMC not only demonstrates increased oxidative stability ascribed to the electron‐withdrawing characteristics of chlorine atom, electrolyte compatibility with both the cathode and anode is also greatly improved by forming Cl‐containing interface layers. Consequently, a discharge capacity of 104.6 mAh g−1 within a voltage range of 3.0–5.0 V is achieved for Na||graphite SDIB that employs a high graphite cathode mass loading of 5.0 mg cm−2, along with almost no capacity decay after 900 cycles. Notably, the Na||graphite SDIB can be revived for an additional 900 cycles through the replacement of a fresh Na anode. As the mass loading of graphite cathode increased to 10 mg cm−2, Na||graphite SDIB is still capable of sustaining over 700 times with ≈100% capacity retention. These results mark the best outcome among reported SDIBs. This study corroborates the effectiveness of chlorination design in developing high‐voltage electrolytes and attaining enduring cycle stability of Na‐based energy storage devices.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB2402600)
- National Natural Science Foundation of China (22109170, 22379158, 52102331, 52125105, 52061160484)
This publication has 69 references indexed in Scilit:
- An Ultrahigh‐Mass‐Loading Integrated Free‐Standing Functional All‐Carbon Positive Electrode Prepared using an Architecture Tailoring Strategy for High‐Energy‐Density Dual‐Ion BatteriesAdvanced Materials, 2023
- Anion Receptor Weakens ClO4− Solvation for High‐Temperature Sodium‐Ion BatteriesAdvanced Functional Materials, 2023
- Solvation Structure Modulation of High‐Voltage Electrolyte for High‐Performance K‐Based Dual‐Graphite BatteryAdvanced Materials, 2023
- A Multifunctional Interphase Layer Enabling Superior Sodium‐Metal Batteries under Ambient Temperature and −40 °CAdvanced Materials, 2023
- All‐Climate and Ultrastable Dual‐Ion Batteries with Long Life Achieved via Synergistic Enhancement of Cathode and Anode InterfacesAdvanced Functional Materials, 2022
- A PF6−‐Permselective Polymer Electrolyte with Anion Solvation Regulation Enabling Long‐Cycle Dual‐Ion BatteryAdvanced Materials, 2021
- Implanting a Fire‐Extinguishing Alkyl in Sodium Metal Battery Electrolytes via a Functional MoleculeAdvanced Functional Materials, 2021
- Optimized Cathode for High‐Energy Sodium‐Ion Based Dual‐Ion Full Battery with Fast KineticsAdvanced Functional Materials, 2021
- Artificial SEI for Superhigh‐Performance K‐Graphite AnodeAdvanced Science, 2021
- Self‐Activating, Capacitive Anion Intercalation Enables High‐Power Graphite CathodesAdvanced Materials, 2018