Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Karanj methyl ester
Author:
- 7 July 2011
- journal article
- research article
- Published by Taylor & Francis in International Journal of Sustainable Energy
- Vol. 30 (sup1) , S91-S105
Abstract
Being a fuel of a different origin, the standard design parameters of a diesel engine are not optimum for Karanj methyl ester (KME). This study aims at finding the effect of the engine design parameters, viz. compression ratio (CR) and fuel injection pressure (IP) jointly on the performance and emissions. Brake-specific fuel consumption (BSFC) and brake thermal efficiency (BTE) were considered for performance evaluation, and emission analysis was done for un-burnt hydrocarbon, carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen (NO x ), exhaust gas temperature and smoke opacity with KME as the fuel. Comparison of performance and emission was done for different values of CR along with IP to find the optimum combination for operating engine with KME. It is found that the combined increase in CR and IP increases the BTE and reduces BSFC while having lower emissions. For small-sized direct injection constant speed engines used for agricultural applications (3.5 kW), the optimum combination was found to be CR of 18 with IP of 250 bar.Keywords
This publication has 26 references indexed in Scilit:
- Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl esterApplied Thermal Engineering, 2010
- Performance of diesel engine with biodiesel at varying compression ratio and ignition timingFuel, 2008
- Methyl ester of karanja oil as an alternative renewable source energyFuel, 2008
- Reduction of diesel smoke opacity from vegetable oil methyl esters during transient operationFuel, 2006
- Numerical analysis of injection characteristics using biodiesel fuelFuel, 2006
- Diesel engine performance and emission characteristics of biodiesel produced by the peroxidation processFuel, 2006
- Improvement of engine emissions with conventional diesel fuel and diesel–biodiesel blendsBioresource Technology, 2006
- Performance and exhaust emission characteristics of a lower compression ratio LHR Diesel engineEnergy Conversion and Management, 2003
- Effect of difference of high pressure fuel injection systems on exhaust emissions from HDDI diesel engineJSAE Review, 1999
- Study of the effects on exhaust emissions in direct injection diesel engines: Effects of fuel injection system, distillation properties and cetane numberJSAE Review, 1998