Silica‐based self‐healing microcapsules for self‐repair in concrete
- 6 December 2015
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 133 (12)
Abstract
New self‐healing material for concrete repair has been fabricated through microencapsulation of silica sol via interfacial polymerization of poly(urea‐urethane). Smooth, uniform, and spherical capsules of 60–120 µm sizes were synthesized and optimized by studying the emulsification and polymerization steps of its synthesis. A hydrophile–lyophile balance (HLB) value of 3.0–5.0 and a rotational speed of 500 rpm were necessary to produce a stable emulsion system of silica sol in surfactants. The polymerization speed of 900 rpm and the methylene diisocyanate (MDI) monomer content of 15 wt % were both significant in getting the right size and smoothness of the microcapsules. With this method and cheap healing agents, industrial scale‐up is highly possible. The viscoelastic properties of the microcapsules were examined, and further characterizations were carried out through scanning electron microscopy, energy dispersive X‐ray spectroscopy, and Fourier transform infrared spectroscopy. After healing the microcracks in concrete, the results showed that the significant increase of compressive and bending strengths manifested the self‐healing ability of the microcapsules in concrete. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43090.Keywords
Funding Information
- Innovation and Technology Fund, HKSAR Project (ITP/004/13NP)
- Nano and Advanced Materials Institute
- The Hong Kong University of Science and Technology
This publication has 32 references indexed in Scilit:
- Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing compositesComposites Part B: Engineering, 2013
- Polystyrene/nano-SiO2 composite microspheres fabricated by Pickering emulsion polymerization: Preparation, mechanisms and thermal propertiesExpress Polymer Letters, 2012
- Use of silica gel or polyurethane immobilized bacteria for self-healing concreteConstruction and Building Materials, 2012
- Nanocharacterization of creep behavior of multiwall carbon nanotubes/epoxy nanocompositeInternational Journal of Plasticity, 2011
- Microencapsulation of a cooling agent by interfacial polymerization: Influence of the parameters of encapsulation on poly(urethane–urea) microparticles characteristicsJournal of Membrane Science, 2011
- Microencapsulation of Isocyanates for Self-Healing PolymersMacromolecules, 2008
- Depth sensing indentation of linear viscoelastic–plastic solids: A simple method to determine creep complianceEngineering Fracture Mechanics, 2008
- Microencapsulation of ammonium phosphate with a polyurethane shell. Part II. Interfacial polymerization techniqueReactive and Functional Polymers, 2006
- Preparation of polyurethane microcapsules with different soft segments and their characteristicsReactive and Functional Polymers, 1999
- Influence of the parameters of encapsulation process and of the structure of diisocyanates on the release of codeine from resinate encapsulated in polyurea by interfacial water promoted polyreactionReactive and Functional Polymers, 1997