Modeling of Short-Term Creep of Fibrous Materials Taking into Account Plastic Deformation of Composition Components
- 1 February 2025
- journal article
- research article
- Published by Pleiades Publishing Ltd in Mechanics of Solids
- Vol. 60 (1) , 1-19
Abstract
A numerical and analytical model of the structural mechanics of multidirectionally reinforced metal-composites operating under short-term creep conditions has been developed. The materials of the components of the metal-composition are homogeneous and isotropic; their thermal sensitivity and thermoelastoplastic deformation are taken into account. Plastic deformation of the phases of the composition is described by the relations of the theory of flow with isotropic hardening. As damage parameters for the components of a metal-composition, their relative mechanical deformation accumulated during loading is used – the deformation criterion for failure during short-term creep of metals. To construct the specified mathematical model, due to its significant physical nonlinearity, an algorithm of variable time steps was used. Linearization of the governing equations for the components and the metal-composition as a whole at each time step is carried out using a method similar to the secant modulus method. Using the example of moment-free cylindrical shells, it is demonstrated that, due to the essentially physical nonlinearity of the modeled problem, varying the reinforcement structure in metal-composite structures operating under conditions of short-term creep has a significantly greater impact on their mechanical response than when operating under conditions of thermoelastic deformation. With an increase in the operating temperature of a metal-composite product, this influence increases sharply. With some, in particular rational, reinforcement structures, the materials of the metal-composition of the product can be deformed, exhibiting signs inherent in limited creep. With such reinforcement structures, the structure can operate effectively under conditions of long-term loading, and not only under short-term creep.Keywords
This publication has 19 references indexed in Scilit:
- Kink band and shear band localization in anisotropic perfectly plastic solidsJournal of the Mechanics and Physics of Solids, 2021
- Simulation of the steady-state creep of crossreinforced metal composites with account of anisotropy of phase materials 2. The case of 2D reinforcementMechanics of Composite Materials, 2013
- Simulation of the steady-state creep of cross-reinforced metal composites with account of anisotropy of phase materials 1. The case of 3D reinforcementMechanics of Composite Materials, 2013
- Homogenization of elasto-(visco) plastic composites based on an incremental variational principleInternational Journal of Plasticity, 2012
- Dynamic response of composite sandwich plates subjected to time-dependent pressure pulsesInternational Journal of Non-Linear Mechanics, 2011
- A simple method to evaluate anisotropic plastic properties based on dimensionless function of single spherical indentation – Application to SiC whisker-reinforced aluminum alloyMaterials Science and Engineering: A, 2010
- Nonlinear creep of unidirectional fibrous composites tensioned along the reinforcementInternational Applied Mechanics, 2007
- Modeling of Creep for Structural Analysis2007
- Analysis of the influence of aggressive environment on creep and creep rupture of rod under pure bendingArchive of Applied Mechanics, 2005
- Creep Mechanics2002