Effects of Homogenization Conditions on the Microstructure Evolution of Aluminium Alloy EN AW 8006
Open Access
Abstract
The industrial production of products, such as foil and aluminium alloy strips, begins with the production of semi-finished products in the form of slabs. These are produced by the continuous casting process, which is quick and does not allow the equilibrium conditions of solidification. Non-homogeneity—such as micro and macro segregation, non-equilibrium phases and microstructural constituents, as well as stresses arising during non-equilibrium solidification—are eliminated by means of homogenization annealing. In this way, a number of technological difficulties in the further processing of semi-finished products can be avoided. The aim of this research was the optimization of the homogenization annealing of the EN AW 8006 alloy. With the Thermo-Calc software, a thermodynamic simulation of equilibrium and non-equilibrium solidification was performed. Differential scanning calorimetry (DSC) was performed on selected samples in as-cast state and after various regimes of homogenization annealing and was used for the simulation of homogenization annealing. Using an optical microscope (OM), a scanning electron microscope (SEM) and an energy dispersion spectrometer (EDS), the microstructure of the samples was examined. Based on the results, it was concluded that homogenization annealing has already taken place after 8 h at 580 °C to the extent, that the material is then suitable for further processing.Keywords
This publication has 16 references indexed in Scilit:
- Effect of homogenization treatment and silicon content on the microstructure and hot workability of dilute Al–Fe–Si alloysMaterials Science and Engineering: A, 2014
- Impact of homogenization on microchemistry and recrystallization of the Al–Fe–Mn alloy AA 8006Materials Characterization, 2013
- Homogenization of twin-roll cast A8006 alloyTransactions of Nonferrous Metals Society of China, 2012
- Microstructure and mechanical properties of nanostructured A8006 ribbonsMaterials Science and Engineering: A, 2012
- Investigation of intermetallics in hypoeutectic Al–Fe alloys by dissolution of the Al matrixIntermetallics, 2009
- Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloyJournal of Alloys and Compounds, 2009
- Microscopic study regarding the microstructure evolution of the 8006 alloy in the plastic deformation processJournal of Materials Processing Technology, 2004
- A eutectoid phase transformation for the primary intermetallic particle from Alm(Fe,Mn) to Al3(Fe,Mn) in AA5182 alloyActa Materialia, 2004
- FactSage thermochemical software and databasesCalphad, 2002
- Intermetallic phase selection in 1XXX Al alloysProgress in Materials Science, 1998