THE INFLUENCE OF GLASSY CARBON AND ITS FORMS ON TRIBOLOGICAL PROPERTIES OF ALUMINIUM MATRIX COMPOSITES
Authors:
- 30 June 2019
- journal article
- Published by Index Copernicus in Tribologia
- Vol. 285 (3) , 79-87
Abstract
Carbon with an amorphous structure was used as a component to modify the tribological properties of engineering plastics. Its construction allows the formation of carbon-based wear products during friction, adhesively bonded to the surface of cooperating machine parts, acting as a solid lubricant. The work compares the tribological properties of two groups of composites with an aluminium alloy matrix in which glassy carbon appeared in the form of particles and an open cell foam fulfilling the role of strengthening the matrix. The use of spatial structures of reinforcement provides, in comparison with the strengthening of particles, homogeneity of carbon distribution in the entire volume of the composite. The tests carried out on a pin-disc tester showed that the use of spatial carbon structures in the composite ensures a greater coefficient of friction stability than when reinforcing with particles, and the coefficient of friction with a small proportion of carbon foams (about 1 wt%) is comparable with the coefficient of friction in the contact with composites containing 5-10% carbon particles in granular form.Keywords
This publication has 14 references indexed in Scilit:
- Composite Coatings with Ceramic Matrix Including Nanomaterials as Solid Lubricants for Oil-Less Automotive ApplicationsArchives of Metallurgy and Materials, 2016
- Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristicsJournal of Materials Research and Technology, 2015
- Wear and mechanical characteristics of Al 7075/graphite compositesComposites Part B: Engineering, 2014
- Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix compositesComposites Part B: Engineering, 2013
- Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulatesComposites Science and Technology, 2010
- Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy methodWear, 2009
- Aluminum Metal-Matrix Composites for Automotive Applications: Tribological ConsiderationsTribology Letters, 2004
- Challenges to developing and producing MMCs for space applicationsJOM, 2001
- Amorphous carbonCurrent Opinion in Solid State and Materials Science, 1996
- Effect of heat treatment temperature (HTT) on density, weight and volume of glass-like carbon (GC)Journal of Materials Science, 1983