Force–Thermal Coupling Effects on Surface Integrity and Subsurface Damage of Al-50 wt% Si Alloy During Milling
Open Access
Abstract
Al-50 wt% Si alloy is widely used in aerospace and electronics but is hard to machine owing to uneven microstructure. To elucidate the relationship between force–thermal coupling effects and surface integrity during Al-50 wt% Si alloy milling, this paper established a stress model to reveal the superposition mechanism of mechanical and thermal stresses. Experiments were conducted to investigate the evolution of cutting forces and temperatures, as well as their influence on surface integrity characteristics, including microhardness, roughness, and chip morphology. The results showed that temperature increases steadily with vc, whereas cutting force fluctuates in an irregular manner. The maximum cutting temperature rises by 85.04% as vc increases from 25 m/min to 125 m/min. Meanwhile, the thermo-mechanical coupling effect exerts a regulatory role on chip morphology, where higher vc improves chip continuity and ductility. Surface integrity is determined by the competitive interplay between work hardening and thermal softening, and the surface microhardness varies from 168.49 HV to 173.27 HV. Specifically, elevated vc optimizes surface quality, with the Ra decreasing by 24.54%, whereas excessive fz and ap aggravate damage. Ultimately, surface defects arise from the combined removal behavior of Si particles and deformation of the Al matrix, while the inhomogeneous stress field induces subsurface damage.Keywords
Funding Information
- National Natural Science Foundation of China (52505514)
- National Natural Science Foundation of China (52575491)
- Department of Science and Technology of Hunan Province (2025JJ50275)
- Youth Project of Wenzhou University of Technology (ky202416)
This publication has 52 references indexed in Scilit:
- Synergistic effect of laser-induced plastic deformation and ultrasonic chip fracture on surface quality and tool life during SiCp/Al turningApplied Surface Science, 2026
- A novel hybrid machining approach for SiCp/Al composites: Insights into material removal mechanisms and surface quality improvementCeramics International, 2025
- Groove bottom material removal mechanism and machinability evaluation for longitudinal ultrasonic vibration–assisted milling of Al-50wt% Si alloyThe International Journal of Advanced Manufacturing Technology, 2023
- Milling performance evaluation and cooling/lubrication mechanism of Al-50wt% Si alloy based on various environmentally sustainable manufacturing strategiesThe International Journal of Advanced Manufacturing Technology, 2022
- Dynamic cutting force model for cutting SiCp/Al composites considering particle characteristics stochastic modelsCeramics International, 2021
- Effects of in-situ TiB2 particles on machinability and surface integrity in milling of TiB2/2024 and TiB2/7075 Al compositesChinese Journal of Aeronautics, 2021
- Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cuttingChinese Journal of Aeronautics, 2021
- Particle fracture and debonding during orthogonal machining of metal matrix compositesAdvances in Manufacturing, 2017
- An enhanced analytical model for residual stress prediction in machiningCIRP Annals, 2008
- Interface shear stresses induced by non-uniform heating of a film on a substrateThin Solid Films, 1993