Current and Potential Distribution on a Coated Pipeline with Holidays Part I—Model and Experimental Verification
Authors:
- 1 March 1993
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 49 (3) , 199-210
Abstract
A two-dimensional model was developed to predict the current and potential distribution of an underground coated pipe in high-resistivity soil under an impressed current, parallel anode, cathodic protection (CP) system. The model was designed to study the effect of discrete holidays of various sizes on coated pipe without having to assume that holidays simply reduce the efficiency of the protective coating. Full-scale experimental tests were conducted with a 0.508 m (20 in.) diameter pipe coated with 460 μm (18 mils) of fusion-bonded epoxy. The performance of a parallel anode CP system was measured in the presence and absence of a discrete longitudinal coating defect (2.4% of the pipe circumference) that exposed bare steel. All tests were conducted in 108,000 ohm-cm water. Good agreement was obtained between experimental results and modeling predictions. The results show that there can be a significant difference in the performance of a cathodic protection system when localized defects exist in the coating as compared to uniformly distributed holidays. This difference is expected to be most pronounced in high-resistivity soils with close anode to pipe spacing.Keywords
This publication has 9 references indexed in Scilit:
- Current and Potential Distribution on a Coated Pipeline with Holidays Part II—Comparison of the Effects of Discrete and Distributed HolidaysCorrosion, 1993
- Mathematical Modeling of Cathodic Protection Using the Boundary Element Method with a Nonlinear Polarization CurveJournal of the Electrochemical Society, 1992
- Cathodic Protection with Parallel CylindersJournal of the Electrochemical Society, 1991
- Numerical Modeling and Solution of Galvanic Corrosion Systems: Part II. Finite-Element Formulation and Descriptive ExamplesCorrosion, 1991
- Numerical Modeling and Solution of Galvanic Corrosion Systems: Part I. Governing Differential Equation and Electrodic Boundary ConditionsCorrosion, 1991
- Role of Surface Structure and Flow Rate on the Polarization of Cathodically Protected Steel in SeawaterCorrosion, 1987
- Predicting the Time Dependence of Polarization on Cathodically Protected Steel in SeawaterCorrosion, 1987
- Ionic Current Densities in the Nearfield of a Corroding Iron‐Copper Galvanic CoupleJournal of the Electrochemical Society, 1986
- Electrogalvanic Finite Element Analysis of Partially Protected Marine StructuresCorrosion, 1983