Effect of Some Environmental Conditions on Stress Corrosion Behavior of Ni-Cr-Fe Alloys in Pressurized Water
Authors:
- H. R. CopsonHCH. R. Copson
- 1 March 1968
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 24 (3) , 55-65
Abstract
Stress corrosion tests have been run in pressurized water at 600 F (316 C) using double U-bends and double bent beam specimens. The tests were conducted in autoclaves for up to 3000 hours. The composition of the gas phase above the water and the pH were controlled. The materials tested were commercial heats of Inconel (1) 600, Inconel 625, lncoloy (1) 800 and stainless steel Types 304, 304L and 347; some Inconel alloy 600 weldments; and some experimental laboratory compositions. Several heat treatments were included. No attack was observed in specimens stressed at 90 percent of room temperature yield strength. No attack was observed when hydrogen constituted the gas phase. No attack was observed when crevices were absent. The combined action of a high stress, a high oxygen concentration and a crevice did promote intergranular attack and cracking in the crevice area in all alloys tested. The severity of the attack increased with the oxygen concentration. Many specimens heated for 2 hours at 1250 F (677 C) showed deeper attack than annealed specimens. Solution heat treatment, low carbon content or the presence of carbide stabilizers did not eliminate the attack. The behavior of weld metal deposits was not significantly different from that of base plate. Variations in composition within the normal range of Alloy 600 were unimportant. Differences in behavior among the several alloys tested were minor compared to those from environmental effects.Keywords
This publication has 14 references indexed in Scilit:
- Development of Test to Simulate Intergranular Cracking of Nonsensitized Stainless Steel in Water Reactor EnvironmentsNuclear Applications, 1965
- Testing Steam Generator Materials For Pressurized Water Reactor PlantsCorrosion, 1962
- Corrosion of Inconel Nickel-Chromium Alloy In Primary Coolants of Pressurized Water ReactorsCorrosion, 1962
- Aspect electrochimique de la corrosion d'aciers inoxydables austenitiques en milieu nitrique et en presence de chrome hexavalentElectrochimica Acta, 1961
- Corrosion of Nuclear Power Plant Tube Materials By Boiler SludgeCorrosion, 1960
- Stress Corrosion Screening Tests of Materials For Steam Generator Tubing in Nuclear Power PlantsCorrosion, 1960
- Qualification of Inconel For Nuclear Power Plant ApplicationsCorrosion, 1960
- The corrosion of austenitic stainless steels under heat transfer in high temperature waterJournal of Nuclear Materials, 1959
- General and Intergranular Corrosion of Austenitic Stainless Steels in AcidsJournal of the Electrochemical Society, 1959
- CORROSION AND WEAR HANDBOOK FOR WATER COOLED REACTORS1957