A Fatigue Life Prediction Method Based on Strain Intensity Factor
Open Access
Abstract
In this paper, a strain-intensity-factor-based method is proposed to calculate the fatigue crack growth under the fully reversed loading condition. A theoretical analysis is conducted in detail to demonstrate that the strain intensity factor is likely to be a better driving parameter correlated with the fatigue crack growth rate than the stress intensity factor (SIF), especially for some metallic materials (such as 316 austenitic stainless steel) in the low cycle fatigue region with negative stress ratios R (typically R = −1). For fully reversed cyclic loading, the constitutive relation between stress and strain should follow the cyclic stress-strain curve rather than the monotonic one (it is a nonlinear function even within the elastic region). Based on that, a transformation algorithm between the SIF and the strain intensity factor is developed, and the fatigue crack growth rate testing data of 316 austenitic stainless steel and AZ31 magnesium alloy are employed to validate the proposed model. It is clearly observed that the scatter band width of crack growth rate vs. strain intensity factor is narrower than that vs. the SIF for different load ranges (which indicates that the strain intensity factor is a better parameter than the stress intensity factor under the fully reversed load condition). It is also shown that the crack growth rate is not uniquely determined by the SIF range even under the same R, but is also influenced by the maximum loading. Additionally, the fatigue life data (strain-life curve) of smooth cylindrical specimens are also used for further comparison, where a modified Paris equation and the equivalent initial flaw size (EIFS) are involved. The results of the proposed method have a better agreement with the experimental data compared to the stress intensity factor based method. Overall, the strain intensity factor method shows a fairly good ability in calculating the fatigue crack propagation, especially for the fully reversed cyclic loading condition.Keywords
This publication has 42 references indexed in Scilit:
- Effect of microstructure on fatigue behavior of AZ31 magnesium alloyMaterials Science and Engineering: A, 2007
- An empirical stress-intensity factor equation for the surface crackEngineering Fracture Mechanics, 1981
- A procedure for estimating the total fatigue life of notched and cracked membersEngineering Fracture Mechanics, 1979
- Prediction of non propagating cracksEngineering Fracture Mechanics, 1979
- Study of fatigue crack initiation from flaws using fracture mechanics theoryEngineering Fracture Mechanics, 1972
- The Stress-Intensity Factor for a Penny-Shaped Crack Between Two Dissimilar MaterialsJournal of Applied Mechanics, 1972
- A note on the finite width corrections to the stress intensity factorEngineering Fracture Mechanics, 1971
- Stress intensity factor for an elliptical crack under arbitrary normal loadingEngineering Fracture Mechanics, 1971
- Fatigue crack closure under cyclic tensionEngineering Fracture Mechanics, 1970
- A Critical Analysis of Crack Propagation LawsJournal of Basic Engineering, 1963