Modelling of room air temperature profile with displacement ventilation
- 27 March 2019
- journal article
- research article
- Published by Taylor & Francis in International Journal of Ventilation
- Vol. 19 (2) , 112-126
Abstract
An accurate temperature gradient calculation is essential for displacement ventilation (DV) system design, since it directly relates to the calculation of supply air flow rate. Several simplified nodal models were developed and implemented in the various building simulation programmes to estimate the temperature stratification in rooms with displacement ventilation. However, the most commonly used models do not take into account the types and locations of the heat loads in rooms with DV. As a result, the calculated air temperature in the occupied zone can defer from the real one by 2–3 °C, which causes poor thermal comfort and inadequate sizing of the ventilation and cooling systems. In the present study, the nodal model was proposed to provide a simplified technique to predict the vertical temperature gradient in rooms with DV. In addition, the effect of the room height and locations of the indoor heat sources were studied for the typical office environment. The measurement data were compared with the existing nodal models and the proposed nodal model in terms of predicting the occupied zone temperatures. The presented nodal model demonstrates an accurate calculation of the temperature gradient for the typical heat loads and combinations of them.Keywords
This publication has 14 references indexed in Scilit:
- Determining thermal stratification in rooms with high supply momentumBuilding and Environment, 2017
- The effect of typical buoyant flow elements and heat load combinations on room air temperature profile with displacement ventilationBuilding and Environment, 2016
- Experimental characterisation of a plume above rectangular thermal sources. Effect of aspect ratioBuilding and Environment, 2012
- Classical plume theory: 1937-2010 and beyondIMA Journal of Applied Mathematics, 2010
- The effect of floor heat source area on the induced airflow in a roomBuilding and Environment, 2010
- An experimental study of the thermal plume developed above a finite cylindrical heat source to validate the point source modelExperimental Thermal and Fluid Science, 2007
- Numerical Simulation and Experimental Validation of Plume Flow from a Heated DiskNumerical Heat Transfer, Part A: Applications, 2006
- Virtual origin correction for lazy turbulent plumesJournal of Fluid Mechanics, 2001
- Vertical Temperature Profiles in Rooms Ventilated by Displacement: Full-Scale Measurement and Nodal ModellingIndoor Air, 1992
- Gaussian versus top-hat profile assumptions in integral plume modelsAtmospheric Environment (1967), 1986