Leaching of heavy metals from wood biomass ash, before and after binding in cement composite
Authors:
- Dijana M. DrljačaDDDijana M. Drljača
- Ljiljana M. VukićLVLjiljana M. Vukić
- Dajana M. DragićDDDajana M. Dragić
- Aleksandra P. BorkovićABAleksandra P. Borković
- Tatjana T. BotićTBTatjana T. Botić
- Pero T. DugićPDPero T. Dugić
- Saša V. PapugaSaša V. Papuga
- Marko D. ŠolićMarko D. Šolić
- Snežana P. MaletićSnežana P. Maletić
- Petar M. GveroPGPetar M. Gvero
- Jelena R. SavkovićJSJelena R. Savković
Open Access
- 1 January 2022
- journal article
- research article
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 87 (9) , 1091-1108
Abstract
Wood ash is a complex mixture of inorganic and organic compounds. It is heterogeneous in composition, which can vary considerably. Ash is mainly disposed of in landfills, which creates a risk for air, soil and groundwater contamination by trace elements. In order for wood biomass ash to be used as a secondary raw material, it is necessary to perform leaching tests, to determine which microelements it contains, and which of them could be released into the environment during the ash disposal. Sequential extraction (SE) showed that in the exchangeable and carbonate fraction, the most volatile metals As, Cd, Zn and Pb are released the most from the ash of deciduous trees, while the leaching of ash from coniferous trees is significantly lower. The evaluation of risk assessment code (RAC) for the tested biomass ash samples, indicates that Pb is a high-risk leaching element due to its condensation on the ash particles. By performing toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) tests, it was established that the released concentrations of tested metals are below the maximum allowable concentration, given by the regulation. The leaching tests of composites, prepared from wood ash in combination with cement, indicate that the leaching of ash is reduced to a minimum, and that all heavy metals are bound in a cement matrix, which indicates the possibility of using wood ash for construction purposes.Keywords
This publication has 22 references indexed in Scilit:
- Heavy metal speciation in various types of fly ash from municipal solid waste incineratorJournal of Material Cycles and Waste Management, 2014
- New methodology for assessing the environmental burden of cement mortars with partial replacement of coal bottom ash and fly ashJournal of Environmental Management, 2014
- Chemical characteristics and risk assessment of typical municipal solid waste incineration (MSWI) fly ash in ChinaJournal of Hazardous Materials, 2013
- Sequential extraction partitioning of trace and nutrient elements in ashes from biomass firing district heating plants2013
- Composition of inorganic elements and the leaching behavior of biomass combustion ashes discharged from wood pellet boilers in JapanJournal of Wood Science, 2013
- An overview of the composition and application of biomass ash. Part 1. Phase–mineral and chemical composition and classificationFuel, 2013
- Distribution patterns of Cd, Cu, Mn, Pb and Zn in wood fly ash emitted from domestic boilersChemical Speciation & Bioavailability, 2013
- Geochemical Controls of Coal Fly Ash Leachate pHCoal Combustion and Gasification Products, 2011
- The Leachability of Major Elements at Different Stages of Weathering in Dry Disposed Coal Fly AshCoal Combustion and Gasification Products, 2011
- Thermal decomposition of calcite: Mechanisms of formation and textural evolution of CaO nanocrystalsAmerican Mineralogist: Journal of Earth and Planetary Materials, 2009