The Influence of Tip Clearance Momentum Flux on Stall Inception in a High-Speed Axial Compressor
Authors:
- Joshua D. CameronJCJoshua D. Cameron
- Matthew A. BenningtonMBMatthew A. Bennington
- Mark H. RossMRMark H. Ross
- Scott C. MorrisSMScott C. Morris
- Juan DuJDJuan Du
- Feng LinFLFeng Lin
- 26 June 2013
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 135 (5) , 051005
Abstract
Experimental and numerical studies were conducted to investigate tip-leakage flow and its relationship to stall in a transonic axial compressor. The computational fluid dynamics (CFD) results were used to identify the existence of an interface between the approach flow and the tip-leakage flow. The experiments used a surface-streaking visualization method to identify the time-averaged location of this interface as a line of zero axial shear stress at the casing. The axial position of this line, denoted xzs, moved upstream with decreasing flow coefficient in both the experiments and computations. The line was consistently located at the rotor leading edge plane at the stalling flow coefficient, regardless of inflow boundary condition. These results were successfully modeled using a control volume approach that balanced the reverse axial momentum flux of the tip-leakage flow with the momentum flux of the approach fluid. Nonuniform tip clearance measurements demonstrated that movement of the interface upstream of the rotor leading edge plane leads to the generation of short length scale rotating disturbances. Therefore, stall was interpreted as a critical point in the momentum flux balance of the approach flow and the reverse axial momentum flux of the tip-leakage flow.Keywords
This publication has 10 references indexed in Scilit:
- Spike-Type Compressor Stall Inception, Detection, and ControlAnnual Review of Fluid Mechanics, 2010
- Flow Structure of Short-Length-Scale Disturbance in an Axial-Flow CompressorJournal of Propulsion and Power, 2008
- Criteria for Spike Initiated Rotating StallJournal of Turbomachinery, 2008
- Compressor Stability Enhancement Using Discrete Tip InjectionJournal of Turbomachinery, 2000
- Comparative Studies on Short and Long Length-Scale Stall Cell Propagating in an Axial Compressor RotorJournal of Turbomachinery, 2000
- Effects of Nonaxisymmetric Tip Clearance on Axial Compressor Performance and StabilityJournal of Turbomachinery, 1998
- 1997 Best Paper Award—Turbomachinery Committee: A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial CompressorJournal of Turbomachinery, 1998
- Prestall Behavior of Several High-Speed CompressorsJournal of Turbomachinery, 1995
- The Unstable Behavior of Low and High-Speed CompressorsJournal of Turbomachinery, 1994
- Stall Inception in Axial Flow CompressorsJournal of Turbomachinery, 1993